全部

1·Bolted flange sealing is widely used in process industry nowadays.

法兰密封在流程工业中应用广泛。

2·Plastics piping systems. Glass - reinforced thermosetting plastics components. Test methods to prove the design of bolted flange joints.

塑料管道系统。玻璃纤维增强式热固性塑料元件。检验栓接式法兰接头的设计试验方法。

3·The traditional design criteria for bolted flanged connections was based on the strength failure, which cannot evaluate in quantity the tightness of flange joints.

传统的法兰设计依据强度失效判据，不能定量估计法兰接头的紧密性。

4·All expansion joints shall have bolted flange-to-flange type connections on both sides of expansion joint for removal of complete unit. Minimum flange thickness shall be 6 mm.

所有的伸缩接头(膨胀节)都应当采用法兰栓接。法兰的最小厚度为6毫米。

5·The elbow shall be bolted to the floor of the wet-well and be so designed as to receive the pump connecting flange without the need for any bolts, nuts or clamps.

弯头应该用螺栓固定在湿井地面，并且设计成具有不需要任何螺栓、螺母或皮带即可连接泵设备的连接法兰的能力。

6·Wheel hub unit is designed with an inner flange and the outer flange and the inner flange bolted on the driving shaft, the bearing outer flange mounted together.

轮毂单元设计成有内法兰和外法兰，内法兰用螺栓固定在驱动轴上，外法兰将整个轴承安装在一起。

7·The discharge pipe flange is bolted to the support plate to prevent piping strain transmission to the pump volute.

排水管法兰通过螺栓连接到支撑板上，以防止管道张力传递到泵蜗壳上。