全部

1·Rudder pintle to be forged steel and fitted with stainless steel sleeve and a synthetic bush bearing.

舵栓采用铸造钢并用不锈钢套和一个合成衬套轴承安装。

2·It features in following four aspects: (1)Bush bearing is replaced by rolling bearing , friction resistance being greatly lowered down , easy to be started and energy saving ;

圆锥球磨机主要有四个特点：（1）传动采用滚动轴承替代滑动轴承，摩擦力大大降低，启动容易，节能显著。

3·The combination bearing are assembled by a rolling bearing, a sliding bearing, a gland bush, a distance bushing and other relative fastening pieces.

该组合轴承由滚动轴承、滑动轴承、压盖、隔套、及相关紧固件组装而成。

4·A measure is taken to use bearing instead of spindle bush as a result efficiency is raised, on the basis of saving cost, production period is also shortened.

通过用轴承代替轴瓦，不仅效率高，同时节约了成本，缩短了周期，使用效果良好。

5·This paper is focused on the virtual testing system of bearing bush for depth of parallelism and height.

本文研究的是一个测试轴瓦高出度及轴瓦对口面平行度的虚拟测试系统。

6·Failure of bearing bush fixture is investigated in accessory gearbox of aeroengine. An improved fixing stud with interference is used to fix the bearing bush.

分析了航空发动机附件机匣轴承衬套采用松螺纹固定的结构在高温时失效的原因。

7·A new structure for fixing the bearing bush of the connecting lever in a crankshaft press is introduced.

针对曲轴压力机连杆上轴瓦的固定问题，介绍了一种新的固定结构。

8·Macro examination, metallographic microscope, microhardness tester and X ray diffractometer were utilized to study the failure reasons for connecting rode bearing bush of automobile engine.

采用宏微观检验、显微硬度测定、X射线衍射等方法对汽车发动机连杆轴瓦的失效进行了分析。

9·Is mainly the axle axis and the bearing bush sliding friction surface wears, becomes rough, creates the bearing oil leak.

密炼机的主要是轴子轴与轴承衬的滑动摩擦表面磨损，变得粗糙，造成轴承漏油。

10·Usually, tungsten bush is used to be the thrust bearing in water power plant, but it is easy burned down since its high temperature during its operation.

水电厂的推力轴瓦，已往多采用钨金瓦，它在运行中温度偏高，容易发生烧瓦事故。