全部

1·Molded Strain Relief is tightly bonded to the cable jacket to ensure a long cable life.

抗拉防脱直接模压到连接器和线缆，以确保较长的线缆寿命。

2·The design shall incorporate provisions that prevent moisture from wicking through the cable assembly even in the event the cable jacket has been punctured.

这种设计应该配置相关物品，以防止电缆外壳被刺穿后导致潮气侵入电缆组件。

3·One of the important performances of polyethylene cable jacket materials is environmental stress-crack resistance, while general-purpose LDPE resin cannot meet all kinds of demands.

聚乙烯电缆护套料的重要性能之一是耐环境应力开裂(ESCR)性能，普通的LDPE树脂不能满足要求。

4·Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable 10.

电线和电缆通用乙烯和丙烯橡胶套规范10。

5·Cable hanging Solana: This cable to Single or galvanized steel wire shares outsourcing jacket and easy to use a separate connection cables attached to the sheathing layer on.

电缆吊挂索：这种电缆以单根或多股绞线镀锌钢丝外包护套且用一个易于分离的连接层附着在电缆护套上。

6·SPVC (Soft Polyvinyl-chloride): Using this elastron for jacket manufacturing ensures the sufficient flexibility of the cable construction and additional decrease of vibratory load.

（柔性的聚乙烯氯化物）：用这种elastron制作护套可以保证线材有足够的柔韧性，并且还能降低振动负载。

7·The sleeve is used for repairing the breakage of the cable and the cable's jacket. It can easily and quickly seal up the damaged outer jacket of the cable, and insulate.

热缩修补片是用以修复电缆及电缆护套破损，能简单而又迅速地将受损之电缆外护套密封并绝缘。

8·The GB/T 12706-2002 adjusts the thickness of armouring steel tape of power cable, and the thickness of corresponding protective jacket changes too, and material usage reduces correspondingly.

GB/T 12706-2002对电力电缆铠装钢带的厚度进行了调整，相应的护套厚度也发生了变化，材料用量相应降低。