全部

1·Concepts of some electric parameters such as frequency, duty cycle, current density and final voltage were introduced and the relation between duty cycle and current density was deduced.

介绍了电参数如频率、占空比、电流密度、终电压等的概念，推导了占空比与电流密度的关系，并综述了电参数对阳极氧化膜性能影响的研究进展。

2·The final inspection of the coating, before the pipe is put into trench, being carried out by a holiday detector which applies a high voltage current across the coating.

在管子放入管沟前，利用覆盖层检查仪对管道覆盖层进行最后的检查，它在覆盖层的两侧施加高压电。

3·This power supply has different regulator controls for the two 12V voltage paths, but it is still at the beta stage, so we will repeat the test for the final version.

此电源具有12V的电压为两个不同的路径调节控制，但它仍处于测试阶段，所以我们将重复试验的最终版本。

4·The inventive adjustable voltage supplier, based on final control signal, supplies one voltage to the nozzle.

该可调式电压供应器根据该组最终控制信号提供一电压给所述喷嘴。

5·Step five: tune the final stage power transistor quiescent current, the current value of the power tube by measuring the voltage of the emitter resistance Converter and get.

第五步：调末级功率管的静态电流，该电流值可以经由过程测功率管的发射极电阻的电压换算而得到。

6·In the final, process the actual test low frequency and middle-frequency electric voltage and current data, attains the accurate result and verifies the accuracy of the method.

最后，对变频调速电机的实际低频与中频电压、电流信号进行了分析，得出了正确结果，验证了该方法的有效性。

7·The EMC5040 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached.

当充电电流在达到最终浮充电压之后降至设定值的1/10 时， EMC5040 将自动终止充电循环。