全部

1·In another building, workers weld solar cells together into strips, then align them by eye on a light box to form the rows and columns of cells that make up a complete solar panel.

在另一个车间里，工人将太阳能电池焊接成一条，然后将这些电池放在一个灯箱中，排成横列和数列，这样就制造成了一个完整的太阳能板。

2·The weld can be divided into four types: butt weld, fillet weld, plug weld and end weld.

焊缝可分为对接焊缝、角焊缝、塞焊缝和端接焊缝四种。

3·Then use the coil ring machine rolled into a circle, with the electrode to weld the interface firmly, welding mouth to carry out X spectroscopy.

然后用卷环机卷制成圆圈，用焊条把接口处焊接牢固，焊口处要进行X光谱检验。

4·Where filler materials having tensile properties deviating (downwards) from the parent metal are used, this fact must be taken into account when dimensioning the weld joints.

从母材部分开始使用具有伸缩性的填角材料之处，计算焊缝时应该考虑到这种情况。

5·Based on the actual situation, guide rods can be processed into the bottom of the department of oval, planar, or tip shape, you can not weld surfacing or alloy.

根据套损实际情况，导向杆下端部可以加工成椭圆形、平面式或笔尖形状，可以堆焊合金或不焊合金。

6·In the paper welded joints with a crack in transverse overmatched weld or HAZ were simplified into a model in which a transverse hard layer contains a crack parallel to the interfaces.

本文将高匹配焊缝或热影响区(haz)淬硬层中含纵向裂纹的焊接接头简化为硬夹层含平行裂纹的力学不均匀体模型。

7·All we need now is a good coach to weld our gifted players into a real football team.

我们现在所需的就是一个好教练，以把我们这些天才球员组织成一支真正的球队。

8·They also serve to stop the back-side of the weld from forming carbide intrusions into the pipes and cones.

他们还有助于阻止后面从形成到管道和视锥细胞碳化物入侵的焊接方面。

9·The Model SPC/L301 viscometer has a 1 1/4 NPT thread to easily install into a process line using a Tee, or into a large tank or pipe, using a weld ferrule.

L301型粘度计有一个1/4” NPT的螺丝配合一个T型的管道，可以很容易的安装到管线上，或者用一个焊接套环，安装到大罐子或管道内。

10·ANAND viscoplastic constitutive equation was introduced into the FE model for calculation of the reduction of welding residual stresses during the post weld heat treatment.

将ANAND粘塑性本构关系引入到焊后热处理消除残余应力的有限元计算中。