全部

1·Two-phase three dimensional flow velocimetry by laser digital holography is being presented.

研究了利用激光数码全息技术实现两相流三维空间速度场测量的方法。

2·The back pressure and the rotational speed have great influence on the performance of the three dimensional flow-path.

转速和背压对三维进气流道的性能有较大影响。

3·A quasi three dimensional flow Euler model with viscous force terms was constructed for integrated small turbofan engine systems.

建立了一体化弹用小涡扇发动机系统含粘性力项的准三维欧拉流动模型。

4·The reason of tool_trapping appeared in the numerical control milling of three dimensional flow impeller is analyzed and the solving measure is put forward.

分析了离心式压缩机三元叶轮数控铣制时出现挖刀现象的原因，提出了解决措施。

5·A comprehension simulation to the three dimensional flow field and temperature field in the mould of slab continuous casting was performed with finite element software ANSYS.

利用有限元软件A NSYS模拟计算板坯结晶器内三维流场和温度场。

6·In this paper, a new method of measuring liquid three dimensional flow velocity by rotaining the probe in the plane was submitted basing elaborate analyzing of hot film anemometer.

本文针对热膜流速仪元件的工作原理提出了在平面旋转测量液体三维流速的方法，并测量了大型精馏塔板液相单相三维流场。

7·The test results of the three dimensional flow condition and temperature field of deep water discharge can be used as scientific basis for planning of the similar outfall of power plant.

所得到的规律特征经实际工程的物模试验结果初步检验被证明可信，可作为电厂规划阶段深层排水方案温排水掺混稀释效果的估算分析方法加以采用。

8·The three dimensional flow of metals during rolling of ingot with liquid core has been studied in the article. Here the influence of liquid core ratio on rolling was studied in particular.

本文研究了液芯轧制时三维空间中金属流动，着重地研究了液芯率对轧制的影响。

9·In this article the mathematical expression of field synergy theory for three dimensional flow with centrifugal force was derived by integrating the energy equation in the concerned volume.

通过对能量方程进行体积分得到了三维流场中场协同理论的表达式。该式不仅含速度矢量与温度梯度矢量的点积项，还含有速度矢量与压力梯度矢量的点积项。

10·The three dimensional flow field of the step cylinder in Hydraulic Control Rod Driving System (HCRDS) is calculated and analyzed with the computational fluid (dynamics) program CFX5 in detail.

应用计算流体力学程序CFX5对水力驱动控制棒步进缸内部的三维流场进行了计算和分析。