全部

1·The CAM member operably connects a temperature control knob to the thermostat.

凸轮元件把一个温度控制旋钮可操作地连接于恒温器。

2·Thus, frequent adjustment of the control knob is required to maintain constant delivery pressure.

因此经常要调整控制钮，以维持恒定的输出压力。

3·A dimmer control knob is provided on the right side of the front panel which also activates the lamp test.

在前面板的右侧提供了一个减光控制旋扭，由此也可以激发灯泡试验。

4·By adjusting the control knob, the second stage reduces the intermediate pressure to the desired delivery pressure.

通过调整控制钮，第二级把中间压力降到需要的输出压力。

5·The drawing Installation of the control knob must be observed if the panel is more than 26 mm thick (there must be a recess at the rear).

绘图“的控制旋钮安装”必须得到遵守，如果小组超过26毫米，厚（必须有一个在后方休息）。

6·Step 3 – Depress the red locking button to secure the setting. Five further clockwise rotations of the control knob to start the GREASOMATIC working.

是不是可以说：按下红色按键来确保设置不被更改。并将手柄转五个点使加脂器开始工作呢。

7·When the temperature control knob to set a temperature, hot and cold water mixing valve through proportional control into the outlet, the outlet temperature is always constant.

当温度调节旋钮设定某一温度后，混水阀通过调节进入出水口的冷热水比例，使出水温度始终保持恒定。

8·The Fairchild model 2800 Plunger Operated Regulator is designed for applications requiring more rapid set point adjustment over the pressure range of the unit than conventional control knob models.

飞兆半导体型号2800的柱塞运营调节器是专为应用程序要求更迅速设置在比传统的控制旋钮型号单位压力范围点调整。

9·The nice thing about it is that we can really have a knob, if you like, which we can control to adjust the rate at which we inject these particles.

非常棒的是我们真的可以得到一个能控制调节粒子注入大气速率的大球体。

10·Damper: both gas flow regulating button and wind board are high grade PP material, connected with 304 stainless steel bar, manually adjust the outside valve knob, control air flow.

气流调节阀：气流调节扭与挡风板均为高密度PP材质，用304不锈钢方棒连接，手动调节外部阀门旋钮，控制气流量。