全部

1·The model of power bond and mathematics of driving and driven pulley oil vat, PWM fast electromagnetic valve is built.

建立了主从动带轮油缸、高速开关阀的功率键合图模型、数学模型。

2·Multi-purpose mini-motorcycle in the belt drive gear for the latter, the main, the size of the driven pulley reduction ratio sub-decision.

在微型摩托车多用皮带传动方式作后传动装置，主、从动皮带轮的大小决定次级减速比。

3·From the experimental results, the following conclusions were drawn: (1) Block compression force distribution on the driving pulley is significantly different from that on the driven pulley.

从实验结果可以作出以下结论：(1)推块压缩力分布在主动带轮上明显不同于从动带轮。

4·The use of commonly used power-driven pulley, the principal organs of an organism, moving teeth set teeth set disk, Central screen, feed hopper and other parts, and fuel used to crush grain.

动力采用常用的皮带轮驱动，主要机构有机体、动齿盘、定齿盘、环筛、喂料斗等部分，用于谷物和油料的粉碎。

5·When the belts have been located in the belt pulley grooves, moves the drive motor away from the driven shaft so that uniform teensioning of the belts is achieved.

在安装新皮带时，要用手动的方式使电机向驱动轴移动而使所有皮带均处于滑轮槽内。

6·If the pulley, sprocket-driven, such as supporting brackets should be established to prevent the initiative gear bearing the radial force.

若用带轮、链轮等驱动时应设托架支承，以防主动齿轮轴承受径向力。

7·In these devices, one of the shafts is typically driven by a motor or pulley, and the other shaft is driving another device.

在这些装置中，典型的情况是，一根轴由发动机或皮带轮传动，另一根轴将动力传递给其他部件。

8·The fan is usually mounted on an extension of the water pump shaft and is driven by V-belt from a pulley mounted on the front end of the cramshaft.

风扇常常装在水泵轴的伸出物上，由安装在曲轴前段的滑轮上的v带驱动。

9·Main drive: the belt pulley is driven by motor (4KW 960rpm).

主传动：由电机驱动皮带轮。

10·The rails pass up to the top of the shaft, where they are taken over a pulley which can be driven in either direction by an electric motor.

导轨直通到升降井顶部。钢丝绳在顶部绕过一个滑轮。滑轮由电动机驱动可向任一方向转动。