全部

1·In the paper, the influencing on the stability of mixed acid milk were studied and the orthogonal experiment were made.

对影响调配酸乳饮料稳定性的因素进行了研究，通过正交试验确定稳定剂的最佳复配配比以及最佳的生产工艺。

2·The high yield of propionic acid in mixed acid fermentation was the main reason for the low hydrogen production capacity.

混合酸发酵的发酵产物中丙酸含量较高是产氢能力偏低的主要原因。

3·A new process of manufacturing decorative aluminium plate is introduced. The figures were engraved by a newly developed mixed acid.

提出了采用耐酸油墨丝网印刷所需图案、 混合酸刻蚀制备装饰性铝板的新方法。

4·In the paper, the factors that influencing on the stability of mixed acid milk were stuidied and the orthogonal experiment were made.

本文对影响调配型酸乳饮料稳定性的因素进行了研究。

5·Wash the wafers with mixed acid, lotion and UPW (ultra pure water) by ultrasonic cleaning in wet sinks to get a clean and dry surface of wafers.

用混合酸、清洗剂和纯水在清洗槽或超声波清洗机内清洗硅片，使其表面洁净并烘干。

6·Duplex stainless steel is used in high temperature environments, mixed acid environments, especially for the Marine, petroleum, chemical equipment.

双相不锈钢适用于高温环境，混合酸环境，特别适用于海洋，石油，化工设备。

7·Methods: Pretest samples using mixed acid, and magnesium was adopted as matrix modifier to determine by graphite furnace atomic absorption spectrometry.

方法：利用混合酸对样品进行消化处理，镁作为基体改进剂，石墨炉原子吸收光谱法测定。

8·According to the practice of nitrochlorobenzene production in our plant, the effects of composition of mixed acid, temperature and stir on nitrating reaction.

根据我厂硝基氯苯的生产实践，概述了混酸组成、温度、搅拌等因素对硝化反应的影响。

9·The stainless steel annealing and pickling process can product large quantity of waste mixed acid(HF/HNO3) that must be treated through acid purification system.

不锈钢生产退火酸洗过程会产生大量废混酸（HF/HNO3），通过酸净化系统对废酸进行处理。

10·The effects of raw materials, impurities, liquid-solid rate in slurry, SO3 concentration, temperature, mixed acid concentration on crystallization are mainly presented.

阐述原料组分及杂质含量、料浆液固比、料浆中的SO3浓度、反应温度、料浆混酸浓度等因素对结晶控制的影响。