全部

1·Microstructure, shear strengths, and wetting property were investigated.

润湿性是乳化液的基本性能之一。

2·In order to improve the wetting property, PET fiber was treated on surface.

为了改善涤纶纤维的润湿性能，对其进行了表面处理。

3·The wetting property of the film was investigated by water contact angle measurement.

采用接触角测量仪测量薄膜表面接触角；

4·The wetting property of PET fiber was ameliorated obviously by the azote plasma treatment.

用氮气对涤纶进行低温等离子处理，明显地改善了其表面的润湿性能。

5·The solder alloy after the improvement improves wetting property and welding spot strength.

改进后 的焊料合金提高了其润湿性能和焊点强度。

6·POSS microstructure, melting characteristic, wetting property and shear strength were investigated.

系统研究POSS颗粒的显微组织，钎料的熔化特性、润湿性能和力学性能。

7·It was found that this latex was excellent in mechanical stability, more uniform in particle size distribution and had good pigment wetting property.

结果表明，该胶乳机械稳定性优良，粒子分布均匀，颜料润湿性和着色性良好。

8·It shows that the low-mole narrow-range ethoxylatsproducts have excellent wetting property and this product can be used as a new material of penetrating agent.

合成的窄分布低摩尔数环氧乙烷加成物具有优良的润湿性，可作为新型渗透剂的主体基料。

9·This paper researches the influence of resin and wetting agent for the property of photoresist.

本论文研究了光阻剂中分别增加环氧树脂和润湿剂对其性能的影响。

10·The results of property test show that the dodecyl polyglucosides behaves the properties of lower surface tension, mildness, higher foaming and wetting capability. The product is a new type of…

性能测试结果表明，十二烷基葡糖苷具有表面张力低、性能温和、 起泡和润湿性优良等特点，是一种新型的非离子表面活性剂。

润湿性

1·In order to improve the wetting property, PET fiber was treated on surface.

为了改善涤纶纤维的润湿性能，对其进行了表面处理。

2·The wetting property of PET fiber was ameliorated obviously by the azote plasma treatment.

用氮气对涤纶进行低温等离子处理，明显地改善了其表面的润湿性能。

3·It was found that this latex was excellent in mechanical stability, more uniform in particle size distribution and had good pigment wetting property.

结果表明，该胶乳机械稳定性优良，粒子分布均匀，颜料润湿性和着色性良好。

4·The solder alloy after the improvement improves wetting property and welding spot strength.

改进后 的焊料合金提高了其润湿性能和焊点强度。