全部

1·A simplified dynamic model of air condenser and the model of its liquid film are driven in this paper.

本文建立了空气冷凝换热器简化动态模型及凝结液膜厚度模型。

2·Air condenser - For the condensing coil in the high side of Refrigeration System. high temperature and high pressure steam is cooled into saturated super cooled liquid in the condenser.

冷凝器应用—用于制冷高压侧的冷凝盘管，高温高压蒸汽在冷凝器中冷却为饱和过冷状态的液体。

3·The evaporator helps cool the air, the condenser helps ready the system's refrigerant for the cooling process, and the compressor helps move refrigerant back and forth between them.

蒸发器有助于冷却空气，冷凝器帮助准备冷却过程中的制冷剂，压缩机有助于制冷剂在它们之间移动来回。

4·The evaporator helps cool the air, the condenser readies the refrigerant for the cooling process, and the compressor moves refrigerant back and forth between them.

蒸发器帮助空气冷却，冷却器为冷却过程准备冷却剂，压缩机将冷却剂在蒸发器与冷却器之间传递。

5·A week with dry compressed air or a copper brush cleaning machine back condenser more than once.

每周需用干燥的压缩空气或铜刷清理机台背部冷凝器一次以上。

6·Air accumulation in the condenser owing to insufficient output of air extractor can increase the terminal temperature difference and the air pressure component.

抽气器出力不足而引起的空气在凝汽器内积聚，使得凝汽器端差和空气分压力均增大，对凝汽器真空造成双重影响。

7·The refrigerant leaves the compressor as a hot, dense vapor and flows through a heat exchanger called the condenser, which transfers heat from the refrigerant to a body of air.

在离开压缩机时，致冷剂已变作高温、稠密的气体，流经一个被称为冷凝器的热交换器，将热量从致冷剂转换作一团气体。

8·The condenser is a heat equipment, the evaporator absorbs heat with heat input power of compressor transformation with the transfer of the cooling medium ( such as water or air ).

冷凝器是放出热量的设备，将蒸发器中吸收的热量连同压缩机输入功率转化的热量一起传递给冷却介质（如水或空气）带走。

9·With the increase of inlet air temperature of the condenser, evaporation pressure, condensation pressure increase, but supercooling and superheat degree, refrigerating capacity and COP decrease.

随着冷凝器进口空气温度的升高，蒸发压力、冷凝压力升高，而过冷度、过热度、制冷量和COP均线性下降；

10·Sanhe has many core technologies such as screw style evaporator, plate type evaporator, Ushape evaporator, V shape condenser, industrial air conditioner and so on.

公司还拥有多项制冷核心技术，如螺旋蒸发器、板片蒸发器、U型蒸发器、V型冷凝器、工业空调机等。