全部

1·Use of ruler sign system to control cutting width.

采用尺标系统控制切割宽度。

2·This method can increase the cutting width evidently, which is validated with example.

在最后的实例中，验证了这种方法能明显地增大加工带宽度。

3·The significance of using thin type circular diamond sawblade is to reduce cutting width, thus lessening stone resources waste.

使用薄型金刚石圆锯片的意义在于减小切缝宽度，从而降低石材资源浪费。

4·A new method for suppressing cutting chatter is studied by adjusting servo parameters of the numerical control (NC) machine tool and controlling the limited cutting width.

研究了通过调节数控机床伺服参数，控制极限切削宽度来抑制切削颤振的新方法。

5·Simultaneously, a cutting blade adjusting device is arranged on the cutting device for adjusting the position of the cutting blade so as to adjust the cutting width of the films or the sheets.

同时增加了刀片调节装置来调节刀片位置，以此来调节薄膜或片材的切割宽度。

6·There is a need for width, if not necessarily a need for 'natural' width, because players cutting in from wide positions can be more dangerous than players who start from central zones.

他们的进攻是需要空间的，需要自然的宽度，因为从边路内切比从中场突破更具威胁。

7·In addition, too much cutting speed and big nozzle height can cause and the increase of the poor incision width.

另外，过大的切割速度和过大的喷嘴高度都会引起切口上下宽度差的增加。

8·They are just 80 atoms thick on their cutting edge - around 1/10,000th or 5,000 times thinner the width of a hair and far sharper than any of common blades on the market.

刀锋的厚度仅相当于80个原子，即发丝直径的五千分之一到一万分之一左右，比市场上的普通刀片要锋利非常多。

9·The gap between the minimum cutting edge cutting, trimming punching die when the distribution width is small, these are to be noticed.

刀口模切割线间的间隙最小，冲孔模修整时的分布宽度也很小，这些都是要注意的。

10·The effects on kerf width and quality made by laser facula diameter, focal point position, cutting speed, laser power and other technological parameters were studied.

研究了激光光斑直径及离焦量、切割速度、激光功率等工艺参数对齿轮切缝宽度及加工质量的影响。