全部

1·Tighten exhaust manifold to cylinder head bolts.

紧固排气岐管汽缸头螺栓。

2·Exhaust manifold, Vibration, Finite element method;

排气总管，振动，有限单元法；

3·The exhaust manifold is bolted to the cylinder head.

排气歧管采用螺栓联接固定在 气缸盖上。

4·The exhaust gas exits through the other exhaust manifold.

废气经另外一个排气歧管排出。

5·The exhaust gas exits through the other exhaust manifold .

废气经另外一个排气歧管排出。

6·Thee exhaust gas exits through the other exhaust manifold.

废气经另外一个排气歧管排出。

7·Clean the exhaust manifold and cylinder head mating surfaces.

清洁排气歧管和汽缸头配合面。

8·The calculation results of unsteady flow in an exhaust manifold model are presented.

最后对一根模型排气管进行了不稳定的流场计算。

9·High back pressure of exhaust manifold, rapid change in load, scavenge fire and so on.

高背压的排气系统，在负载快速变化，清除火灾等。

10·In many engines, the thermostat is located in a well in the intake or exhaust manifold.

在很多发动机内，恒温控制器装在进气岐管或排气岐管的空腔中。