全部

1·Specifications for particular types of winding wires - Part 14 : polyvinyl acetal enamelled round aluminium wire, class 105.

特种绕组线规范。第14部分：聚乙烯醇漆绝缘的圆铝线，等级105。

2·Equipped a winding structure on the deck beam and taking the winding wire rope as the closed rope, it can work as a long stay bar grab.

在抓斗的上承梁上装设一套卷扬机构，通过卷扬钢丝绳作为闭合绳，从而达到长撑杆抓斗的工作效果。

3·Equipped a winding structure on the deck girder and taking the winding wire rope as the closed rope, It can work as a long stay bar grab.

在抓斗的上承梁上装设一套卷扬机构，通过卷扬钢丝绳作为闭合绳，从而达到长撑杆抓斗的工作效果。

4·An inorganic heat-resistant insulating film (32) is formed on at least a part of a surface of the dust core (31) which faces a winding wire (12).

在压粉磁心(31)中的与线圈(12)对向的面的至少一部分上，形成有无机类的耐热绝缘被膜(32)。

5·Electric Motor grab: Equipped a winding structure on the deck girder and taking the winding wire rope as the closed rope, It can work as a long stay bar grab...

电动马达抓斗在抓斗的上承梁上装设一套卷扬机构，通过卷扬钢丝绳作为闭合绳，从而达到长撑杆抓斗的工作效果。

6·Applied to the stranding of seven units of copper winding aluminum, copper winding steel, bare copper cable, painting winding wire, alloy wire and tin plated wire.

适用七股以上的铜包铝、铜包钢、裸铜线、漆包线、合金线镀锡线绞合。

7·Specifications for particular types of winding wires - Part 39: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180.

特种绕组线规范。第39部分：玻璃纤维编织的树脂的或清漆浸渍的裸的或漆包扁铜线。温度指数180。

8·Structure: High Temperature High Pressure Hose for the winding wire matrix, skin coated nano-refractory coating layer, stainless steel wire woven layer and layer fire-retardant composition.

结构：以耐高温高压钢丝缠绕胶管为基体，外皮包覆纳米耐火涂料层、不锈钢丝编织层和阻燃层构成。

9·For such a low frequency, which would only be resorted to when it is indispensable for the operation of ordinary motors, I would use a secondary winding wound from a wire 50 miles in length.

对于如此低的频率，它将只有是依靠于当它对普通马达运行时不可缺少，我将使用一个次级线圈创伤自一根50英里长的线。

10·Five, cut off the body: the cutting mechanism is winding forming, cut off the wire is the last of the spring drop of the processing action, cutting through the knife and the core to complete.

切断机构：切断机构是卷绕成形后，切断钢丝是弹簧落下的最后一个加工动作，切断时通过刀和芯来完成。