全部

1·The gradient PPS/FEP composite anti-corrosive coatings were prepared on carbon steel. The bonding strength of all coating systems was determined by the pull-off test.

在碳钢表面制备了具有梯度结构的PPS/FEP复合防腐蚀涂层，采用拉开法测定了各涂层体系的结合强度。

2·The bongding strength of blended PPS/FEP anti-corrosion coatings was determined by pull-off test. The effects of the blending component PPS on the bongding strength were studied.

采用拉开法测定了PPS/FEP共混改性防腐涂层的结合强度，研究了共混组分PPS对复合防腐涂层结合强度的影响。

3·Test method (dry) : 1.3 M tape stuck in the picture has's ink surface 45 degree Angle quickly pull up not to take off oil. 2.

测试方法（完全干燥后）： 1．3M胶纸粘在画有百格的油墨表面45度角迅速拉起不脱油。

4·This article has described the key factors that influence the pull-off adhesion test for zinc-rich coatings and notes during the tests.

叙述了影响无机硅富锌涂料拉开法附着力测定的关键因素和注意事项。

5·Carol hopes to pull off a perfect score on her math test.

卡萝希望在她的数学考试中得到好成绩。