全部

1·Fit for chamfering vertical work piece.

可用直角型工件倒角。

2·Fit for chamfering irregular shape and arc work piece.

可用不规则形状及圆弧形状加工件使用。

3·The percentage of powder that is deposited on the work piece.

粉末沉积在工件上的百分数。

4·After cutting, the cutting slag on the work piece should be cleaned.

切割后，工件上的割渣应清理干净。

5·High residual stress distribution zone lies in the center of work piece.

平板工件中心存在较大的残余应力分布区。

6·The movement experiment result indicated that the work piece is separated accurately.

运行实验结果表明，工件被准确分组。

7·These bubbles collect on the surface of the work piece and interfere with passivation.

这些气泡聚集在工件表面上阻碍了钝化作用。

8·Then I conduct a detailed analysis of the work piece and determine the Stamping program.

然后对工件进行了详细工艺性分析以及冲压方案的确定。

9·The shape precision of grinding wheel affects the surface finish of work piece directly.

砂轮的形状精度直接影响着工件磨削表面质量。

10·They come in many wire sizes depending upon the work piece and the type of finish that you want.

它们的各种尺寸是由被打磨加工的物件以及所需的成品类型来决定的。