全部

1·Based on the shape factor and the effective Poisson ratio an effective method to transform from lateral strain of funnel-like specimen to axial strain of standard specimen is developed.

基于形状因子与等效泊松比的原理，建立了——漏斗型小试样径向应变向轴向应变换算的等效方法。

2·The yield procedure and mechanics of steel 35 under torsional load were studied by standard cylinder specimen in this paper.

本文采用标准光滑圆柱试样，研究了35钢在扭转载荷下的屈服过程以及屈服机理。

3·The specimen shall be transverse, using dimensions less than standard if necessary, and shall be prepared from a wafer heat treated with the material to be delivered.

试样应当横向取，如果必要，尺寸可以低于标准要求。试样应当从与发运材料一同热处理的圆盘中取样。

4·Controlled and monitored temperature at specimen tray level with BST (Black Standard Thermometer).

通过标准黑板温度计bst控制和监测样品盘的温度。

5·The developed standard sample and standardization sample solve the problem of no suitable specimen.

通过研制标样和标准化样品，解决了没有适宜标样的困难。

6·Based on this, SRM s pressure, thrust, mass flow rate and their integration sum are predicted with correlation parameters of random specimen and standard motor.

在此基础上利用随机试件和标准发动机的相关参数预示了发动机的压强、推力、流量及其积分。通过算例可以看出。

7·The relative comparison of the evaluated person in different data specimen is offered by means of standard marks method, i. e. evaluating the standard difference.

对于不同数据样本所对应的被评价人的相关性，通过求同样本中评价值的标准差而采用标准分法给出不同样本对各自被评价人之间的相对比较。

8·Each breed's parent club creates a STANDARD, a written description of the ideal specimen of that breed.

每一个品种的分会都制定出一个书面化的用该品种典型的特征来描述的标准。