全部

1·The creep rate of the composites is 2 ~ 3 orders lower than that of Mg matrix alloy.

硼酸镁晶须增强镁基复合材料比基体镁合金的蠕变速率低2 ~ 3个数量级。

2·The creep rate was increased while the yield strength was reduced by anodic dissolution.

阳极电流不但使恒载荷下的不锈钢蠕变速度增加，而且使屈服强度下降。

3·The press time for balance of sesame and peanut was selected by using curves of creep rate.

运用蠕变速率曲线确定了芝麻、花生、碎花生的平衡压榨时间。

4·The results show that the creep rate of mudstone is not only related to stress state, but also to time.

研究结果表明，泥岩的蠕变速率不仅与时间密切相关，还与应力水平相关。

5·The creep rate of the slates are also fitted. The results show that the creep rate decreases gradually until it reaches the steady rate.

同时，对板岩蠕变过程中蠕变率的变化情况也进行相关的拟合，显示出板岩蠕变率逐步减小到稳态蠕变的过程，取得较好成果。

6·Dualistic regression coefficients of two parameters (steady creep rate and creep damage rate) of the HP-50 reformer tubes are calculated.

计算了HP 5 0转化管稳态蠕变速率参量和蠕变损伤速率参量的二元回归系数。

7·The constant creep rate was increased and creep-resistance breaking time and creep breaking elongation were decreased with the increase of applied stress.

随施加应力的增大，纤维的恒蠕变速率增大，抗蠕变断裂时间变小，蠕变断裂伸长变小。

8·The compressive creep rate in the alloy was mainly controlled by the lattice diffusion of zinc and dislocation limb, and the grain boundary sliding contributed for it in some degree.

稳态蠕变速率主要由锌的点阵扩散和位错的攀移所控制，品界滑移对蠕变也有贡献。

9·The steady-state creep strain rate is a power function of deviatoric stress and exponential function of temperature and energy.

稳定蠕变应变率本构方程是作用在盐岩上的应力偏量的幂次函数和能量与温度的指数函数。

10·The creep strain rate sensitivity can be determined from the relationship between the creep hardness and creep strain rate by the definition of work of indentation.

基于压痕做功概念定义了压痕蠕变硬度和蠕变应变速率，从而给出钎料的蠕变速率敏感指数。