全部

1·A method for subdividing the grating pulse signal by means of using computer clock pulse is presented in this paper.

本文介绍了一种利用计算机时钟脉冲细分光栅脉冲信号相位的方法——改进型时钟脉冲细分技术。

2·Simulation of relative delays between Data and Clock pulse trains in 0.1 microseconds increments to 3.1 microseconds.

对于数据和时钟脉冲列之间的相关延迟的模拟，以0.1微秒为递增单位增加到3.1微秒。

3·It is called a shift register because the data is shifted through the register by one bit position on each clock pulse.

这就是移位寄存器，因为数据在每一个时钟脉冲的作用下通过寄存器会移动一位。

4·After the stop bit is received, the device will acknowledge the received byte by bringing the Data line low and generating one last clock pulse.

在收到停止位之后，设备将通过拉低数据线，生成最后一个时钟脉冲来应答收到的字节。

5·To use the way of put a driven circuit behind the pulser, lead through the input of count clock pulse, can avoid the irregular date on the counter during experiment effectively.

在脉冲发生器输出端后加一级驱动电路，再接入计数器的时钟脉冲源输入端，可有效地避免通常发生在实验过程中计数器不规则的跳变。

6·The conversion speeds and results of ADC0809 analog-to-digital converter are accurate tested and analyzed by using multi-master clock pulse with different frequency and pulse width.

使用多组不同频率和不同脉宽的工作时钟，定量测定分析ADC0 80 9模数转换器的转换速度和转换结果。

7·The parallel loading of the flip-flop can be synchronous (i. e., occurs with the clock pulse) or asynchronous (independent of the clock pulse) depending on the design of the shift register.

触发器的并行加载可以是同步的(即在时钟脉冲到达时发生)或异步的(不依赖于时钟)，这取决于移位寄存器的设计。

8·Frequency controlled data (m) plus an accumulative phase data output by a phase register in an N-bit adder when a clock pulse comes, the result is sent to the input port of the phase register.

每来一个时钟脉冲，N位加法器将频率控制数据m与相位寄存器输出的累加相位数据相加，并将结果送相位寄存器输入端。

9·Your surgical procedure will depend on whether your project just needs the electronic pulse generator. or a clock with working hands that continues to tell time.

你的方法取决于你的项目是只需要那块电子脉冲发生器，还是带有指针，可以继续报时的时钟。

10·Your surgical procedure will depend on whether your project just needs the electronic pulse generator. or a clock with working hands that continues to tell time. If you just need the clock's ticker.

对钟表犹如外科手术般的拆卸过程取决于你接下来的项目只是需要电子脉冲发生器，或者是一只带着指针仍然能为你报时的闹钟。