全部

1·Edge trimming technology is not used usually in drawing technology for low-walledand box-shaped drawing parts.

在拉深工艺中，对于矮壁盒型拉深件，一般不采用。

2·Because after being drawn the edge of a drawing piece is no flattening generally it needs edge trimming to meet the demand usually realized by side-cutting and turn-cutting dies.

由于拉伸件在拉伸后边缘不平整，一般需要修边才能达到要求，通常采用侧切和旋切模实现。

3·This machine can fulfill the processes such as paperboard printing (1~5 colors), creasing, edge trimming, slotting, corner cutting, hole punching and die cutting etc in one cycle automatically…

能一次完成纸板1—5色印刷、压线、修边、开槽、切角、打孔、模切等多道工序。

4·Based on physical simulation of edge rolling process in Trimming-Free plate rolling method, the effection of V rolling and chamfer rolling on the plate profile is analyzed.

基于中厚板无切边轧制法中立轧轧边变形的物理模拟，分析了平辊立轧与倒棱轧制对中厚板断面形状的影响。

5·Based on physical simulation of edge rolling process in Trimming-Free plate rolling method, the affection of V rolling and chamfer rolling on the plate profile is analyzed.

基于中厚板无切边轧制法中立轧轧边变形的物理模拟，分析了平辊立轧与倒棱轧制对中厚板断面形状的影响。

6·The gap between the minimum cutting edge cutting, trimming punching die when the distribution width is small, these are to be noticed.

刀口模切割线间的间隙最小，冲孔模修整时的分布宽度也很小，这些都是要注意的。

7·A new type of structure of the trimming dies and the formulae for designing the cutting edge of the dies are put forward, the manufacture process and the seriation of the dies are discussed.

提出新型切边模结构和刃口齿形设计计算公式，论述模具制造工艺、模块翻新和模具系列化方案。

8·If the edge line of the stamped part still has dimensional problem, this method can be used repeatedly to optimize the trimming line.

如果试冲零件边缘线有误差，可反复采用这种方法优化修边线。

9·Be suitable for trimming edge for double color sole.

适用于双色鞋底之毛边修削。

10·This machine is one of corollary equipment for making steel blade die cutting plate. It is used to trimming and cutting for die cutting ruler and creasing rounded edge after modelling.

本机是制做钢刀模切版过程中的配套设备之一，它可广泛用于切线刀，压痕线在成型后的修整、切断。