全部

1·The printing and coating process on tin plate and aluminium plate cans were described.

简述了马口铁罐和铝质罐的印刷涂装工艺。

2·Materials: aluminium plate, thin low carbon steel plate, stainless steel plate, al -...

材质：低碳钢薄板、铝板、不锈钢板、铝镁合金板、铜板、镍板。

3·The optimum technological parameters for the laser cutting of aluminium plate have been obtained.

获得了激光切割铝板的较佳工艺参数。

4·The supervisor control for aluminium plate rolling is important for production process controlling.

铝板轧制过程的控制是板材生产过程自动化中的重要环节。

5·Anodized aluminium plate Aluminium plate for offset printing with a specially prepared surface. SeeAnodizing.

阳极氧化铝版版面经过特别处理的柯式印刷用铝版。参阅阳极投送化法。

6·The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝微弧氧化陶瓷层电绝缘性能的影响规律。

7·A new process of manufacturing decorative aluminium plate is introduced. The figures were engraved by a newly developed mixed acid.

提出了采用耐酸油墨丝网印刷所需图案、 混合酸刻蚀制备装饰性铝板的新方法。

8·The sensor further comprises an aluminium plate which carries out injection molding, beam enveloping and forming with the upper cover;

该 封闭式汽车油位传感器还包括一铝板，该铝板与上盖注塑射包成型。

9·This is similar to another aluminium plate system shown below which is nearing completion at USL and is destined for a customer in China.

该系统与另一个铝板系统相似，该系统显示在下面，且已在USL接近完成，最终客户在中国。

10·This article discussed anodic oxidation mechanism of aluminium plate by means of electrode potential, Nernst equation, overpotential and so on.

用电极电势、能斯特方程式和超电势等，论述了铝板的阳极氧化机理。

铝板

1·Meanwhile, the difference in thermal conductivity of underlining materials (plastic sheet, steel sheet and aluminium plate) has little effect on the etching rate.

研究还发现，不同垫层（塑料片、钢片和铝板）导热性能对刻蚀速率影响很小。

2·This is similar to another aluminium plate system shown below which is nearing completion at USL and is destined for a customer in China.

该系统与另一个铝板系统相似，该系统显示在下面，且已在USL接近完成，最终客户在中国。

3·This article discussed anodic oxidation mechanism of aluminium plate by means of electrode potential, Nernst equation, overpotential and so on.

用电极电势、能斯特方程式和超电势等，论述了铝板的阳极氧化机理。

4·The optimum technological parameters for the laser cutting of aluminium plate have been obtained.

获得了激光切割铝板的较佳工艺参数。