全部

1·The torsional moment of transmission shaft and power of electric motor are reduced by the method.

此方法可降低传动轴上所受的扭矩，减少了电动机的功率。

2·Similar comments apply to torsion if the torsional moment and twist per unit length are constant throughout a member.

如果扭矩和单位长度上扭角沿杆件为常量，则上述的结论也可以用于扭矩。

3·Cylinder shaft body is connected to its hole body more and more by pinch fit so as to transmit torsional moment at high speed of revolution.

圆轴体同圆盘形孔体的联结，越来越多地采用过盈配合，传递扭转力矩，高速地旋转。

4·Cylinder shaft body is connected to its hole body more and more by pinch fit so as to transmit torsional moment at high speed of revolution.

圆轴体同圆盘形孔体的联结，越来越多地采用过盈配合，传递扭转力矩，高速地旋转。这是形状规则的轴对称接触问题。

5·It wholly changes the defects of hard-sealed metal ball valves such as easy to be leaked, big torsional moment and non-corrosive seal surface.

彻底改变了金属硬密封球阀艺泄露、扭矩、密封面不耐腐蚀的缺点。

6·The three-dimensional photoelasticity method is used to analyze the stress distribution in the bevel gear under torsional moment and centrifugal load.

本文用三维光弹性法分析锥齿轮在扭矩和离心载荷下的应力分布。

7·When the frame beam works under torsional moment, extra bending moment is to be produced in the reinforce slab because the frame beam and the reinforce slab work together.

由于现浇框架梁板共同工作，当梁受扭时，板中必然产生附加弯距，同时板也约束了梁的转动。

8·The new scheme is put forward to design magnetic pulley with large torsional moment by means of planar contact between end-cover and added flange fixed axially by stud bolt.

提出了用圆筒两端加制法兰与端盖平面接触轴向螺栓连接的方法设计大扭矩磁滑轮的方案。

9·When the resistive moment of surrounding soil is less than the torsional moment of eccentric jacking force, stability failure of pipeline occurs and pipes deviates from the designed axes.

管道失稳是由于管道周围土体提供的抵抗力矩小于偏心顶推力而产生的扭转力矩，造成管节偏离设计轴线。

10·Performance of the coated tool and non-coated tool in cutting process is analyzed through measuring durability of the indexable insert turning tool and cutting force (torsional moment) of tap.

介绍了涂层刀具与未涂层刀具在切削加工中的性能比较及试验研究。主要通过不重磨车刀的耐用度及丝锥的切削力（扭矩）等因素来展开试验分析。

扭矩

1·The torsional moment of transmission shaft and power of electric motor are reduced by the method.

此方法可降低传动轴上所受的扭矩，减少了电动机的功率。

2·The new scheme is put forward to design magnetic pulley with large torsional moment by means of planar contact between end-cover and added flange fixed axially by stud bolt.

提出了用圆筒两端加制法兰与端盖平面接触轴向螺栓连接的方法设计大扭矩磁滑轮的方案。

3·The three-dimensional photoelasticity method is used to analyze the stress distribution in the bevel gear under torsional moment and centrifugal load.

本文用三维光弹性法分析锥齿轮在扭矩和离心载荷下的应力分布。