全部

1·The full stress design of a cantilever beam under a combined load is discussed.

讨论了悬臂梁在联合载荷作用下满应力截面设计问题。

2·The proposed method for analyzing combined load flow is proven through a case study.

算例分析证明了本文所提出的用于分析混合负荷方法的收敛性和有效性。

3·Taper roller bearings are generally used to support combined load mainly consisting of radial load.

圆锥滚子轴承主要用以承受径向载荷为主的径向与轴向联合载荷。

4·Tapered roller bearings are generally used to support combined load mainly consisting of radial load.

轴承主要用于承受以径向载荷为主的径向与轴向联合载荷。

5·Tapered roller bearings are generally used to support combined load mainly consisting of radial load .

轴向载荷能力非常大，在承受轴向载荷的同时还可以彻骨你受干径向载荷。

6·Some part of the casing reaches plastic range in the combined load state and the casing may be cracked under 1.5 times of the combined load.

在组合载荷下机匣局部出现塑性，在1.5 倍组合载荷作用下机匣可能发生破坏。

7·Tapered roller bearings are generally used to support combined load mainly consisting of radial load. Their cups are separable for easy assembling.

圆锥滚子轴承主要用以承受以径向载荷为主的径向与轴向联合载荷：外圈可分离，组装容易。

8·Calculates the load distribution in a tapered roller bearing under combined loads, and analyzes the effect of misalignment on the loads in a tapered roller and raceways.

通过计算承受联合载荷的圆锥滚子轴承负荷分布，分析了在不同偏斜状况下圆锥滚子及滚道受力的变化趋势，总结出偏斜对圆锥滚子轴承受力的影响。

9·By solving its stability different ial equation using Kayleighs quotient, the critical load calculation method for this type of paling acted on combined load was proposed.

应用瑞利商求解其倾覆稳定微分方程，给出了组合荷载作用时栅条稳定临界荷载计算方法。

10·Concerning anulus failures such as fissures and disc prolapses, the mechanical response of the intervertebral disc during combined load situations is still not well understood.

关于像脑裂和椎间盘突出时的环纤维，椎间盘在联合负荷状态下的反应机制目前尚不清楚。