全部

1·The crack sensibility is one important content in steel weldability.

裂纹敏感性是钢的焊接性的重要内容之一。

2·The performance and weldability of industrial pure titanium were recommended.

介绍了工业纯钛的特性及焊接性。

3·Good impact and abrasion resistance. Excellent gas cutting property and weldability.

良好的抗冲击耐磨性，很好的可气割性和可焊接性。

4·The paper investigates the weldability of D36 HSLA steel used for heavy crane beams.

研究了重型吊车梁用D36低合金高强钢的焊接性。

5·The weldability of high strength steel for railway vehicle produced by Baosteel was studied.

研究了宝钢高强度铁道车辆用钢的焊接性。

6·As the steel grade improved, the requirements for toughness and weldability are also enhanced.

随着管材强度级别的提高，对管材的韧性、焊接性等性能要求也进一步提高。

7·It power boasts excellent machinability, high corrosion resistance, gond weldability and conductivity.

具有极佳的成型加工特性，高耐腐蚀性、良好的焊接性和导电性。

8·This article conducts a research on the weldability of crystal diode lead wire luminous electrotinning.

本文对晶体二极管引线光亮电镀锡的可焊性进行了研究。

9·This paper studies the effect of zinc and shielding gas type on Laser weldability of zinc-coated steels.

本文研究了锌对镀锌板激光焊接性影响，以及不同保护气体对镀锌板焊接性的影响。

10·The paper points out, that both joint strength and weldability should be considered, while selecting welds.

并指出对焊缝的选择，既要考虑连接强度，又要考虑加工的可能性。

焊接性

1·High strength, toughness, weldability and low temperature toughness is also widely used in the manufacture of Bridges, boilers, ships and other large structures.

强度较高，且韧性、焊接性及低温韧性也较好，被广泛用于制造桥梁、锅炉、船舶等大型结构。

2·The crack sensibility is one important content in steel weldability.

裂纹敏感性是钢的焊接性的重要内容之一。

3·The performance and weldability of industrial pure titanium were recommended.

介绍了工业纯钛的特性及焊接性。

4·The weldability of high strength steel for railway vehicle produced by Baosteel was studied.

研究了宝钢高强度铁道车辆用钢的焊接性。

5·The results show that the steel has excellent weldability, the joints have not only high strength, but also sufficient plasticities and ductilities.

结果表明，该超高强钢的焊接性良好，不仅接头强度高，而且塑性仍保持很高水平。

可焊性

1·The sensibility of strain aging, ductile-brittle transit temperature, weldability, and the coordination between strength and ductility of reinforced steel bars were systematically investigated.

对试验钢筋的应变时效敏感性、韧脆转变温度、可焊性、强度与韧性的配合进行了系统的测试和研究。

2·Repair measures of large reducer with housing cracking are introduced by examples. Analysis is carried out on weldability. Detailed description is done on repair welding technology.

结合实例介绍了箱体断裂的大型减速机的修复措施。对可焊性进行了分析；对补焊工艺作了详细说明。

3·Ni B plating possesses good weldability and conductivity, and the electrode loss is lower than that of silver electrode. It may be used instead of silver plating.

镀层具有良好的可焊性和导电性， 其电极损耗低于银电极损耗， 可作为代银接触镀层。

4·The weldability, repair quality and reliability of a furnace tube bear closed relation to the accumulated damage at microscale. Certain correlation between the hardness and damage could also be found.

炉管的可焊性、修复质量和可靠性与炉管组织的损伤程度有密切的关系，而硬度与炉管的损伤也有一定的相关性。

5·Description: - Special wear resistant manganese steel featuring high toughness and excellent weldability.

说明：-特别耐磨锰钢，具有高韧性和优良的可焊性。