全部

1·Picoammeter amplifier gain can be changed as in the voltmeter circuit by using the combination shown in Figure 1-11.

和电压表电路一样，可以使用如图1 - 11所示的组合电路来改变皮安表放大器的增益。

2·The experiment results show that phase phenomena are probably caused while the servo amplifier gain and the amplitude of input signal increase to some extent.

实验结果表明，当伺服放大器增益和输入信号的幅值较大时都有可能促成系统的相位突变。

3·Simulations have been done through adjusting parameters such as input signal amplitude, feedback gain, amplifier gain, comparator gain and the position of the phase compensator.

改变输入信号幅度、反馈增益系数、放大器增益、比较器增益等参数以及相位补偿器的位置进行了仿真。

4·This kind of change usually goes on automatically, it does not need artificially changing circuit to be joined, but realizes the change of the amplifier gain through the software.

这种变化通常是自动进行，即不需要人为的改变电路连接，而是通过软件实现放大器增益的改变。

5·The most important effect of this is to make the overall amplifier gain almost immune to changes in the amplifier unit gain, and dependent almost entirely on the feedback network components.

负反馈的最重要作用在于使放大器总增益不至于因基本放大器增益的改变而变化，其总增益的大小完全取决于反馈网络的元件参数。

6·The replica-amplifier gain enhancement technique is applied to improve the DC gain of the amplifier, which does not degrade the output swing and is very suitable for low-voltage applications.

为了提高运放的直流增益，采用了复制运放增益增强技术，这种技术的特点是在提高增益的同时不影响输出摆幅，非常适合低电压场合。

7·The effects of the square wave cycle, phase, duty cycle and the fiber coil group delay and amplifier gain bandwidth on the bias error of closed-loop FOG were analyzed by simulating and testing.

通过仿真和测试分析了调制方波的周期、相位、占空比、光纤环的群延时以及放大电路的增益带宽对陀螺输出偏置的影响。

8·Upon reception of a burst detection start trigger signal, a gain control signal is output to an automatic gain control amplifier (201) so as to perform amplification with a maximum value.

当接收到短脉冲检测开始触发信号时，向自动增益控制放大器(201)输出一个增益控制信号，以便用最大值进行放大。

9·In the transmit direction, the transceiver provides RF signals to the power amplifier, which amplifies the signals based on gain and ramp information for a given modulation type.

在发送方向，收发信机向功率放大器提供射频信号，功率放大器根据给定调制类型的增益和斜坡信息对信号进行放大。

10·Wideband amplifier, realized by the technology of automatic gain control (AGC), is used widely in radar system and other correlative electronic fields.

采用自动增益控制(agc)技术实现的宽频带放大器在雷达系统及其他相关电子领域有着广泛的应用。