全部

1·Overall responsible fall molding process documents maintain, PFMEA optimization.

负责整个注塑制程的文件维护，过程FMEA的更新和优化。

2·Clarify the linkage between DFMEA and PFMEA, as well at the linkages to the other core tools.

清晰地连接产品失效模式和后果分析和过程失效模式和后果分析，以及和其他核心工具之间的连接。

3·Lead process certification projects, creation maintain PFMEA, MSA, PCP etc. with quality team.

领导过程认证项目，与质量团队一起建立和维护PFMEA, MS A, PCP等。

4·Are appropriate potential failure modes, as identified in the PFMEA, addressed through the control plan?

所有在PFMEA中被识别的失效模式，是否在控制计划中都得到体现？

5·Are potential failure modes, as identified in the PFMEA, addressed through error-proofing or the control plan?

在PFMEA中所确定的潜在失效模式是否有防错措施或控制计划来处置？

6·Design process flow diagram. Support PFMEA. Support process control plan. Take charge of operation instruction.

负责工艺流程图编制，参与PFMEA、控制计划编制，负责操作指导书编制。

7·Set up process document, and related engineering document like WI, PFMEA, PMP, Control Plan & Process Flow chart.

设立工艺文件及相关的工程文件，如WI，PFMEA， PMP， 控制计划及工艺流程图。

8·Plan and update PFMEA based on real scrap rate before new project hand over to production department as GQS required.

在新项目移交到生产部门前，按照GQS的要求，基于实际报废率计划及更新PFMEA；

9·According a new product, technics, material and quality status, establish and/or revise PFMEA, control plan, SOP, and provide the training files for work station and workers.

根据新产品、新工艺、新材料及质量状况等变化，建立或更新失效模式分析、控制计划、作业指导书等工艺文件，并培训宣贯至相应工位和人员。

10·The product Characteristics Matrix reflects includes all of the features designated as having special characteristics and the RPN rankings shown are the same as in the PFMEA.

产品特性矩阵反应了包括所有设计的特性，正如有和PFMEA里所显示的一样的特别特性和RPN等级。