全部

1·Treatment of ground pulp with lipase was investigated to reduce resin content of pulp.

本研究用脂肪酶对磨木浆进行处理，以降低浆料中树脂含量。

2·This paper introduces an improved test of soluble resin content in epoxy preimpregnated DMD material.

本文介绍了一种改进的环氧树脂预浸DMD可溶性树脂含量检测方法。

3·The correlation formula for calculating the resin content and curing degree of UP FRP were introduced.

本文介绍计算聚酯玻璃钢树脂含量和固化度的校正公式，该公式对实际工作有一定的指导意义。

4·The results have shown that the precoated sands with low resin content, high strength, and low gas evoluti…

结果表明，对原砂进行表面处理可以提高粘结剂的粘结效率，提高覆膜砂的强度，减少树脂加入量，降低发气量。

5·It has some virtues such as less damages to GF, non pollutant to environment and easy control of resin content.

该工艺具有对纤维损伤小、不污染环境和树脂含量容易控制等优点。

6·The influences of the resin content and molding parameter on the air permeation of bipolar plates were researched.

考察了树脂含量和成型工艺参数对双极板透气性能的影响。

7·The pulp has a comparatively high resin content, since the acid cooking liquor dose not remove the resinous matter found in the wood.

由于这种酸性蒸煮液不能去除木材中的树脂类物质，所以浆料中树脂含量相对较高。

8·The effect of resin content and weaving type of the fabrics on mechanical properties of carbon fabric reinforced composites was studied.

本文研究了织物编织类型及树脂含量对碳织物复合材料力学性能的影响。

9·The resin content in timber of Yunnan pine was mainly controled by hereditary substance, and also affected by the geographic variation of grow place.

云南松木材的松脂含量主要决定于遗传因素，但又受生长地理位置变异的影响。

10·The specification identifies the resin compound to be used and stipulates minimum resin content, solution viscosities, and physical performance qualities.

这个规定定义了所使用的树脂化合物，规定了最小树脂含量，溶液粘度，以及物理性能质量。