全部

1·Shear Angle increases with the increase in cutting speed.

切削过程中，剪切角随切削速度的增加而增大。

2·Shear Angle research is one of the basic problems in metal cutting theory.

剪切角的研究是金属切削理论中的一个基本问题。

3·Tips are positioned in opposite shear Angle, very good chips evacuation. Max r. p. m 20000.

刀头按反向剪切角布局，具有优秀的排屑效果，最大转速为20000转每分钟。

4·Based on the minimum energy solution of shear Angle, the cutting forces in orthogonal machining are predicted theoretically in this paper.

基于剪切角的最小能量解，对正交切削时的切削力进行了理论预报。

5·The critical shear Angle of quasi-static state was given under different loading speeds and frame lengths condition, and the influence of specimen size on this shear Angle range is also discussed.

得出了在不同拉伸速度和边框长度条件下装置处于准静态时的临界剪切角，并且分析了织物试样尺寸大小对准静态范围的影响。

6·Aggregate box outsourcing crushing room design, can effectively prevent the leakage of crushing crushing the best shear angle, small resistance, not easy clamping, improves the cutting efficiency;

集料盒外包粉碎室四周设计，可有效防止粉碎时粉碎料漏出最佳剪切角度，阻力小，不容易卡死，提高削切效率；

7·The effect of transverse shear deformation is considered and Angle of rotation of surface normal for each layer is different.

这类板的横向剪切变形效应必须予以考虑，因而层板不同层的表面法线的转角是不同的。

8·In this paper, the investigation of the variations of the peak power and phase Angle of a laser beam passing through a turbulent shear layer is discussed.

本文论述一个由流体力学和光学联系起来的新课题——激光通过湍流剪切层后的相位变化及峰值功率变化。

9·Shearing Angle can be adjusted within a certain range, which can reduce the shearing deformation of sheet metal and can shear much thicker sheet metal.

刀架剪切角能在一定的范围内调整，可使剪切材料变形量减小到理想状态，又可剪切超厚板料。

10·Testing study is made on the basic mechanical property of thenardite salt rock, which includes uniaxial compressive, indirect tensile and Angle changed shear tests.

针对岩盐这一特殊性质的岩石，进行了基本的力学特性试验，包括单轴压缩、间接拉伸及变角剪切。