全部

1·Cutting edges must be free from burrs.

刃口不能有毛刺。

2·Removing scratches or burrs for welding side of hairline.

拉丝表面焊接后的去划痕及毛刺。

3·It's like a weed with burrs And stickers that prick people.

就好像一根带刺的杂草刺伤人。

4·This business card printing up text there would be no burrs.

这样制卡上去的文字就不会有毛刺。

5·Parts to be clean ad free of MFG oll, burrs, and sharp edges.

工件应该保持清洁，没有MFG油，毛刺，锐边。

6·The centers must be aligned and the mandrel must be free of burrs.

这些中心点必须排列成一行，并且保证心轴上没有毛刺的现象出现。

7·Use the reaming blade on the end of the tube cutter to remove any burrs.

用截管器尾部的铰刀清除毛边。

8·I made sure that all the burrs were cleaned up so I didn't damage the plug.

我相信所有的毛刺被清理，所以我并没有损害堵塞。

9·Also check that the adjoining pipework is clean and free from debris and burrs.

也检查所连接的管道是否清洁，没有碎片和毛刺。

10·It can remove burrs and fine powder on the tablet, with no static electricity generated.

可去片剂的毛边及细粉，且不产生静电。

毛边

1·To facilitate customer manipulation, strips of stainless steel are rolled to smooth the edges and remove any burrs.

为了方便客户的操作，轧制不锈钢带以使表面光滑，去除毛边。

2·This equipment is right finishing tool to remove burrs.

是上述产品后道毛边、飞边、批锋去除工艺的最佳设备。

3·Metal parts: Free of rust, splinters, cracks, running paints, scratch, and burrs, or other obvious defects. Edges and corners shall be rounded.

金属部分：无锈，刺，裂痕，脱漆，划痕，毛边，其他明显的缺陷。