全部

1·Solution: Disconnect the power, reconnect, replace the fuse, replaced or fixed pulley belt.

解决办法：断开电源，重新连接，更换保险丝，更换皮带或固定皮带轮。

2·The EOD Rope hook set is composed of hook, rope, fixed pulley, adjustable lever, clamp, multi-function clip and disk.

排爆绳钩组是由钩、绳、定滑轮、可调节杆、卡紧器、多功能工作夹、吸盘等多种器材组成。

3·The ends of the wire ropes are respectively connected on suspension cages through fixed pulley blocks respectively installed on a headframe.

钢丝绳的线头各自通过安装在井架上的定滑轮组，又各自连接到吊笼上。

4·The fixed pulley is rotated by a cranking bar to wind the steel cable, a spare tire can be lifted, and the spare tire can be put down stably by rotating in reversal the cranking bar.

使用摇把转动定滑轮圈绕钢丝索，即可提升备胎，反转摇把即可平稳降下备胎。

5·The tower type belt driven long stroke pumping unit is composed of the crank-linkage-slide mechanism, movable pulley-narrow belt-fixed pulley mechanism and compound drum stroke-increment mechanism.

无游梁塔架式胶带传动长冲程抽油机由曲柄-连杆-滑块机构、动滑轮-窄胶带-定滑轮机构和复合滚筒增程机构组成。

6·The new scheme is put forward to design magnetic pulley with large torsional moment by means of planar contact between end-cover and added flange fixed axially by stud bolt.

提出了用圆筒两端加制法兰与端盖平面接触轴向螺栓连接的方法设计大扭矩磁滑轮的方案。

7·Steel column is fixed to special jig, slipping below the installation position by chain block and lifting by pulley block and windlass.

将钢骨柱固定在专用胎架上，通过倒链滑移至安装点下方后，采用滑轮组和卷扬机进行提升就位。

8·The pulley is fixedly installed on the wall, and the rope which is threaded through the pulley is connected with the lamp-socket, then the other end of the rope is connected with a fixed object.

其滑轮固定安装在墙上，灯座与穿过滑轮的绳索连接，绳索的另 一端与固定物连接。

9·The electric cord transverse robot joint features that toothed belt pulley of the toothed belt pair is fixed on the output shaft of the servo motor and is integrated with the nut of nut-screw pair;

伺服电机的输出轴固定齿形带副的带齿皮带轮，齿形带副的皮带轮与螺母丝杆副的螺母一体；

10·The cord-pulley pair consists of a disc and several pieces of traction steel cord, and the disc is fixed onto the output shaft of the servo motor.

圆盘和数根牵引钢绳构成绳轮副，伺服电机的输出轴与圆盘固定。