全部

1·The server connection diagram generated by our application appears as follows.

该应用程序生成的服务器连接图如下所示。

2·The following shows the steps involved in creating the server connection diagram.

下图说明了创建服务器连接图的步骤。

3·It presents the circuitry diagram of the main loop of electric drive system and the external wire-connection diagrams of PLC and converter.

给出了电力拖动系统的主回路电路图、PLC和变频器的外部接线图。

4·In application of possible fault components set and fault components connection diagram, the model can quickly adapt to variations of power system operating modes.

可疑故障元件库和故障元件连接图的应用使得该模型能够快速适应电力系统运行方式的变化。

5·The two routers communicated with each other via serial connection, and each router connected to the ThinkPad through Ethernet. This is shown in our connection diagram.

两个路由器通过串行线联接起来，并且每个路由器通过以太网连接到ThinkPad。

6·The knowledge inference method of the general network modeling with graphic interface is introduced, in which the system model is gradually inferred from the visual system connection diagram.

提出了一种符合图形界面下建立通用电网模型的知识推理方法。

7·A wire is simply a connection in the assembly diagram that indicates which reference is connected to which component.

连线是指组装图中的连接，表示某个引用被连接到某个组件。

8·Adding a connection from the bean to a.jsp shows up in the Web Diagram, along with the success condition created from the bean to the.jsp.

添加从bean到. jsp的连接显示在Web图中，同时被创建的从bean到. jsp的成功状态也显示在web图中。

9·Create a connection on our diagram.

在图表中创建连接。

10·The diagram of connection of main hardware circuit in the examine system and flow diagram of main software module are provided.

文中给出了检测系统主要硬件电路的连接示意图和主要软件模块的流程图。