全部

1·Clip cable to cable guide at valve cover.

把电缆夹进阀盖上的电缆导槽。

2·Install relief valve cover nut and tighten.

安装安全阀阀盖螺母，并加以紧固。

3·A water valve cover many products and ribs, played a clog.

阀盖上有很多个进水品和加强筋，起到了不易堵塞。

4·Tight all closures and put the valve cover door on position before shipment.

运输前拧紧所有密封件，盖好阀门挡板。

5·Bite valve cover protects from dirt and debris, includes a bite valve inside.

咬合阀盖保护阀远离灰尘和碎片，包括内置咬气门芯。

6·Remove the relief valve cover, stem/diaphragm assembly, and relief valve spring.

拆卸安全阀阀盖，阀杆/隔膜总成，和安全阀弹簧。

7·With the valve cover tilted up you can see the single overhead CAM shaft and valves.

与阀盖倾斜了，您可以看到单一的架空凸轮轴和阀门。

8·Regulation in a number of institutions under the valve cover as part of the body is not separated.

在一些调节机构中下阀盖作为阀体的一部分，并不分离。

9·In some regulatory agencies as the lower body Gate Valves part of the valve cover, not separation.

在一些调节机构中下阀盖作为阀体的一部分，并不分离。

10·Diaphragm valve body flow smoothly, cutting components for the elastic diaphragm, valve cover stuffing.

隔膜阀体流通平滑、节流元件为弹性隔膜阀，阀盖上无填料函。