全部

1·The photographic elements contain a blue - sensitive hydrophilic colloid silver halide emulsion layer.

照像材料含有亲水胶体的感蓝卤化银卤剂层。

2·By using a new emulsion making technique, a core-shell AgX emulsion for color negative red-sensitive layer was prepared successfully with photographic characteristics significantly improved.

采用新型乳剂制备技术，研制出彩色底片感红层核壳型乳剂，其照相性能得到明显的改善。

3·Adhesive layer materials for different conditions may be recommended by using of direct shear test and pullout test with SBR modified emulsion asphalt, SBS modified asphalt and Japan epoxy binder.

采用SBR改性乳化沥青、SBS改性沥青和日本环氧粘结剂三种层间粘结剂，利用直剪试验和拉拔试验进行层间抗剪性能分析，可以推荐出适合不同条件的粘结层材料。

4·Method Using the height of oil layer in the centrifuged emulsion as evaluating criterion, the main factors that affect the stability of emulsion were selected by orthogonal design method.

方法采用正交设计法，以所制乳剂离心分层油层的高度为考察指标，对影响乳剂稳定的主要因素进行优选。

5·Remove paint, sealing layer (protection layer), resin emulsion cement (wear - resisting flooring), protruding part, rain trace, trowel mark, rough surface, uneven joint etc.

去除油漆、密封层(保护层)、胶脂水泥(耐磨地坪)、高出部分、雨迹、镘刀痕、粗糙表面、不平接缝等。

6·Remove paint, sealing layer ( protection layer ), resin emulsion cement ( wear - resisting flooring ), protruding part, rain trace, trowel mark, rough surface, uneven joint etc.

去除油漆、密封层（保护层） 、胶脂水泥（耐磨地坪） 、高出部分、雨迹、镘刀痕、粗糙表面、不平接缝等。

7·The experiments show that the optimal focal plane is focused at the surface layer of the photographic emulsion.

实验表明，最佳焦面实际集中在各种胶片乳剂层表层。

8·The adding of the iodide ions into the subsurface layer of the silver halide crystal could increase the light absorption, sensitivity and contrast of the emulsion.

碘离子掺入到亚表层可增加乳剂的光吸收，提高感光度，增加反差。

9·A heat and mass transfer model across the external boundary layer of polymer particles in emulsion phase with condensed mode operation was derived.

通过建立气相法聚乙烯冷凝模式操作流化床乳化相中粒子外边界层的热质传递模型，研究了冷凝模式操作时聚合粒子的过热情况。