全部

1·The unpredictability of global demand and the lag time it takes to add more cows to a herd to meet demand can result in events like the recent cheese surplus.

全球需求的不可预测性，以及为了满足需求而增加更多奶牛所需的滞后时间，可能会导致像近期奶酪过剩等事件的发生。

2·The two have jet lag time.

有时差的两个时间。

3·What's the lag time?

迟到时间是多少？

4·Forget the lag time of email or waiting for a call back.

不再需要无止境地等待电子邮件或者是电话回复。

5·There's a lag time, so it'll flicker all over the place.

由于存在时间的滞后，它的颜色会闪烁不停。

6·Note: brake lag time of the DC power supply cut is no-load brake lag time.

注：空载制动时间为直流侧切断制动器电源的制动时间。

7·The lag time should be accurate so as to ensure cutting consistent with depth.

迟到时间必须准，岩屑和深度才能一致。

8·Improves the spontaneous auto-ignition point of diesel fuel, which shortens ignition lag time.

改善自发自燃点的柴油燃料，点火延迟时间缩短。

9·Lag time: the time the secondary server requires to confirm communication from the primary server.

Lag time：备份服务器确认来自主服务器的通信所需的时间。

10·Just make sure the lag time between the master host failing and the slave host taking over is minimal.

要确保主服务器发生故障和辅助服务器实施接管之间的延迟时间最小。

时滞

1·Prior to this, there was a lag time of a few seconds (depending on your system) if you wanted to zoom in or out on an image.

在此之前如果你想放大或缩小图像时会有几秒的时滞（取决于你的系统）。

2·The factors which affect the lag time and drug release behavior were investigated, such as the type and thickness of the inner and outer layers, the type and amount of the plasticizer, etc.

本文考察了溶胀层种类和厚度、控释层包衣液类型和包衣层厚度、增塑剂种类和用量等因素对时滞及药物释放速率的影响。

3·AIM To develop a novel pulsatile drug delivery system of which the lag time is cont rolled by an erodible plug (EP) and evaluate its release characteristics in vitro.

目的制备一种由溶蚀塞控制时滞的新型脉冲给药系统并对其体外释药行为进行评价。

4·Hardness, the ratio of hydrophilic and hydrophobic materials and viscosity had notable effects on the lag time.

硬度、亲疏水性物质比、溶出介质黏度对时滞影响显著。

5·The factors which affect the lag time and drug release behavior were investigated, such as the thickness of the inner and outer layers, the amount of PVPP and other excipients, etc.

单因素考察发现，影响释药时滞和释药速率的主要因素为溶胀层中高效崩解剂比例、溶胀层增重及控释层增重。