全部

1·The experiment methods of the bonding strength between deformed steel fiber and concrete was self-designed.

自行设计了异形钢纤维与混凝土粘结强度试验方法。

2·Sutong bridge adopted a module structure combined with deformed steel and unit rubber polymer as expansion joint.

苏通大桥主桥伸缩缝采用异型钢与单元橡胶密封带组合的模数式结构。

3·Basing on the experiment results, analyze the toughening effect of deformed steel fiber and probe into the bond mechanism of it.

根据试验结果分析异形钢纤维增韧效应，探讨异形钢纤维的增韧机理。

4·Experiments on bending toughness, breaking toughness and cube strength test results are carried out in connection with various kind of deformed steel fiber.

针对不同种类异形钢纤维进行了弯曲韧性、断裂韧性、立方体抗压强度等试验。

5·Studies the effect of the pre-polygonization heat-treatment on the recovery and recrystallization of cold-deformed steel 45 by TEM, tensile test, hardness test and thermal analysis.

本文用电镜观察、拉伸试验、硬度试验、差热分析等方法研究了45钢冷形变后的预多边化处理对随后的回复、再结品过程的影响。

6·Or simply because the upper and lower steel bar deformed activities are not free.

或由于钢杆变形根本就上下活动不自由。

7·Integral abutment means constructing top structure, abutment and pile foundation as a whole body. The pile foundation is steel H-pile, and can be deformed with abutment, having greater flexibility.

整体桥台是把上部构造、桥台和桩基全部浇筑在一起的一种桥台构造，其桩基为H型钢桩，具有较大的柔性，可以随桥台一起变形。

8·The paper deals with the continuous cooling transformation of deformed and undeformed austenite for SBL microalloyed engineering steel, and the CCT diagram has been obtained as well.

用解析法预报变形后奥氏体相变产物的类型和形态的首要问题是对CCT曲线进行解析化处理。

9·Based on the deformed characteristics of the process of steel tube cold cross rolling, an system of roll configuration design has been established.

根据钢管冷斜轧过程的变形特点，建立了辊型设计系统。

10·The microstructure of hot-dip aluminum coat of deformed low-carbon steel containing RE has been analyzed by metallography microscopy and XRD, and the forming mechanism has also been discussed.

用金相显微镜及X射线衍射仪对形变含稀土低碳钢热浸镀铝的镀层微观组织进行了分析，并探讨了其形成机制。