全部

1·The hot exit gas from the reformer enters the refractory-lined inlet chamber.

热出口气体从转化炉进入耐火材料衬里的进气室。

2·A stack nozzle is arranged above or behind the furnace body, and an air inlet chamber is arranged below the furnace body.

在炉体的上 方或后方设置出烟口，在炉体的下方设置进风室。

3·The volume of liquid inlet chamber is increased through the rotation of push rod, and the polymer liquid enters through the self pressure.

通过推杆 的旋转使进液腔的体积增加，聚合物溶液通过自身压力进入。

4·The effects on solids holdup of heat exchanger tube, bed height, static pressure drop and average solids holdup of inlet chamber by superficial velocity were studied in different main distributors.

在不同结构形式的主分布器条件下，研究了表观液速对换热管中固含率、下管箱内床层高度、静压降及平均固含率的影响。

5·The investigation is done to the measuring method of the persian blinds airflow direction and speed at the inlet of cooling wind chamber of high speed power car.

对高速列车动力车冷却风室进风口处百叶窗空气流向、流速实车测量方法进行了研究。

6·The effects of intake chamber volume, diameter and length of inlet duct and inlet manifold on volumetric efficiency were analyzed.

分析了进气总管和进气支管的管长、管径以及进气腔容积对充气系数的影响规律。

7·This could be the baffle or buffer chamber mounted on the inlet chute to overcome.

为此可在进口溜槽中安装折流挡板或缓冲腔来加以克服。

8·The simulated results showed that by preheating the inlet air, natural gas can realize the self-ignite in the separated chamber and burn quickly.

模拟计算结果表明，在采取进气预热措施后，天然气在分隔室燃烧室中可以可靠着火，并能迅速燃烧。

9·A fluid flow meter comprises a chamber having a fluid inlet and a fluid outlet.

一种流体流量计包括具有流体入口和流体出口的腔室。

10·Oxygen is purged from the chamber using nitrogen gas, which is introduced in a controlled manner via a 'nitrogen knife' at the web inlet and via an injector in the curing chamber.

清除氧是由室内使用氮气，这是实行控制的方式通过'氮刀'在网络入口，并通过一个注射器在治疗室。