全部

1·Vickers hardness test.

维氏硬度别试；

2·The penetration process is similar to Vickers hardness test.

弹体的侵彻过程与压入法测硬度相似。

3·Surface Vickers hardness and fracture toughness were measured.

测试表面维氏硬度，计算断裂韧性。

4·The Vickers hardness exhibits a linear increase and the relative density increases too.

复合材料的硬度呈直线增加，相对密度也增大。

5·In the fourth part, a Vickers hardness auto measuring system is developed based on machine vision.

在理论研究的基础上，本文的第四部分中设计了一个机器视觉维氏硬度自动检测系统。

6·The penetration process is similar to Vickers hardness test, it is triaxial compressive stress condition in the target.

侵彻时的应力状态与压入法测硬度相似，靶内应力状态为三向压应力。

7·The vickers hardness and nitriding surface fulfill requirements, and also improves the machining quality of the products.

主轴锥孔的维氏硬度和氮层深度均达到要求，提高了产品的加工质量。

8·HV-10T Vickers hardness Vickers hardness tester using the new technology of precision mechanical and optical technologies.

HV - 10 t型小负荷维氏硬度计采用精密机械技术和光电技术的新型维氏硬度计。

9·The hardness of all metals samples can be continuously established with the same scale by Vickers hardness test. But the test methods are inefficient.

只有维氏硬度试验可以使所有金属建立起连续一致的维氏硬度标度，但原试验手段效率低。

10·The martensitic steel 15 was heat treated under high pressure in the CS-IB type hexahedron anvils press. The Vickers hardness of the sample was measured.

对原始组织为马氏体的冷轧15钢在CS - IB型六面顶压机上进行了高压热处理，测量试样的维氏硬度。