全部

1·A significant amount of in-situ concrete was used as a finished surface.

大量的现浇混凝土作为成品的表面材料。

2·Jacquard, stretch fabric for customers to provide high-quality cloth and finished surface.

大提花，弹力面料竭诚为客户提供各种优质胚布和成品面。

3·PITTED: Small indentations appearing as black dots on finished surfaces of any piece of product; undesirable surface defects.

麻面：在任何成品零件的表面上出现的小的黑色的麻点，这是不希望的缺陷。

4·The influence of different cutting speed and feed rate on the roughness of vane's finished surface was investigated and analyzed.

研究分析了不同的切削速度及进给量对叶轮叶片加工的表面粗糙度的影响。

5·There were remnants strain and stress in the finished surface and the remnants strain and stress decreased with the distance of tool tip and the finished surface increased.

在加工表面上存在着残余应力和残余应变，且残余应力和残余应变随着与刀尖和已加工表面之间距离的增大而减小。

6·The grinding processes of advanced ceramic material are studied by using indentation damage theory, and their influence on the finished surface and component properties is discussed.

采用压痕损伤理论研究和分析高性能陶瓷材料的磨削加工过程及其对加工表面和零件性能的影响。

7·Hone not FINISHED: Defect on honed surface; finish ground surface not cleaned up adequately by the honing operation.

珩磨未完：珩磨表面的缺陷，磨加工过的表面通过珩磨工艺没有变得足够光洁。

8·The surface of the finished glass has the power to adsorb out of the resin mixture one or more constituent necessary for complete curing of the resin.

处理过的玻璃表面有从树脂混合物中吸附出一种或几种组分的能力，而这些组分对树脂完全固化是很必要的。

9·In product design and development, surface modeling of product based on measured data often is finished by some commercial software.

在产品设计与开发中，测量数据的表面建模主要采用一些商品化软件来完成。

10·Top deck of the carrier is finished in rough grip surface.

顶层甲板的载体，是完成在粗糙握表面。