全部

1·Due to unsatisfactory softened water, dense water scale grows inside the cooling water jacket blast furnace.

由于软化水不合要求，使鼓风炉水套内产生了致密的水垢。

2·The numerical simulation on fluid flow in cooling water jacket of 498 diesel engine is performed using computational fluid dynamics (CFD) software FLUENT.

应用CFD模拟分析软件FLUENT对498发动机冷却水套内的流场进行模拟计算，研究分析了水泵内流场对发动机内冷却水流动的影响。

3·For dirty water or sanitary sewage applications, clogging of the cooling jacket passages can easily occur due to a build-up of solids, grease, corrosion and other matter.

但是对于污水或生活污水应用领域，冷却套通道由于淤积固体颗粒、油脂、腐蚀等等却极易发生堵塞。

4·Three-way regulating valve is currently used to control the temperature of cooling water in jacket cooling water system of main marine diesel engine.

为了实现船舶主柴油机的变流量冷却，需要对主机缸套冷却水系统进行水力计算。

5·A water - cooling system consists of water jacket, water pump, radiator, thermostat, cooling fan, rubber hose, etc.

水冷法系统包括水套，水泵，幅射器，温箱，冷却风扇，橡胶水喉，等。

6·For this reason, the numerical simulation on the flow and heat transfer in engine water jacket becomes a principal method to optimum cooling system.

因此，内燃机水套冷却液流动数值模拟便逐渐成为目前研究内燃机水套冷却液流动、设计和优化水套结构的重要手段。

7·Two completely different schemes for cooling water flow are obtained by changing the diesel engine's water flow from the oil condenser to the water jacket of the cylinder block.

通过改变柴油机从机油冷却器流入机体水套的水流动方式，得到两种完全不同的冷却水流动方案。

8·Based on heat transfer theory, the paper analyzed the heat transfer mechanism of jacket cooling water system of main Marine diesel engine, and put forward a dynamic mathematic model for the system.

利用传热学理论，对船舶主柴油机缸套冷却水系统的传热机理进行了分析，给出了其动态热力数学模型。

9·The top of the mixing crock is provided with an inlet of sugar materials, a gas entrance, and a pressure gauge, and the outer wall of the mixing crock is provided with a water cooling jacket.

搅拌缸顶部设有糖料入口，气体进出口和压力表，搅拌缸外壁设有冷却水套。

10·Two methods for roaster gas cooling, water jacket and waste heat boiler, are alternative.

烟气冷却有夹套冷却或余热锅炉两种方式。