全部

1·Check the left tie rod joint.

检查左侧横拉杆接头。

2·Check the right tie rod joint.

检查右侧横拉杆接头。

3·Loosen tie rod at the wheel carrier.

松开车轮支架处的横拉杆。

4·Press out tie rod on wheel carrier with press-out tool.

使用压出工具压出车轮托架上的转向横拉杆。

5·Tie rod threads are rolled for strength and engagement.

拉杆线程推出的力量和参与。

6·A rod, called a tie rod, connects to each and of the rack.

拉杆，或称为转向拉杆，与摇臂的另一端连接。

7·This can be done through adjusting the length of the tie rod.

调节前束可以通过调节横拉杆的长度来进行。

8·The locking tie rod or pulling rope is connected with locking pin.

锁闭拉杆或拉绳与锁闭销连接。

9·The tie rod at each end of the rack connects to the steering arm on the spindle.

齿条一端连着拉杆，拉杆与车轮轴上的转向摇臂相连接。

10·The results showed that the intermediate tie rod was fractured by corrosion fatigue.

结果表明，该中间拉杆的破断属腐蚀疲劳失效。