全部

1·With different process principle, given the structure property and key design point of die mold of the head.

结合不同工艺原理，分析指出了机头口模的结构特点和设计要点。

2·We could produce plate for structural use, Welded structural use, Building use, Machine structural use and plastic die mold use.

我们可制造结构用钢板、焊接结构用钢板、建筑结构用钢板、机械结构用钢板、以及塑胶模具用钢板。

3·Application of high-speed cold stamping die mold for enterprises improve productivity and reduce product cost has a very important role.

高速冷冲压模具的应用对企业提高模具的生产效率，降低产品成本有很重要的作用。

4·By adopting the compound mold of die mold, furan resin sand and graphite sand, the heavy duty thin wall complex Al-alloy castings have been successfully produced.

采用金属型、呋喃树脂砂、石墨砂等复合铸型，成功生产了大型、薄壁、复杂铝合金铸件。

5·Regardless of movement speed, its traveling distance and space for rotation are constant therefore can spray repeatedly; Easy operation so it's suitable for the complex structure die mold.

无论高速或低速运行，其行程及扭距相同，并可反复喷吐，在运用上较为灵活，适用于结构较复杂之模具。

6·Die flat, mouth upward, from top to bottom directly into the mold.

模具平放，口向上，由上到下直接进入制粒模具里。

7·Cixi City fly-Die factory is a set mold design, mold processing and manufacturing as one of the mould factory.

慈溪市飞强模具厂是一家集模具设计、模具加工与制造为一体的模具制造厂。

8·The mold is benefit amplifier, with the mold to produce the final product value, often die oneself value a few times, hundreds of times.

模具又是“效益放大器”，用模具生产的最终产品的价值，往往是模具自身价值的几十倍、上百倍。

9·Applying mold release or silicone to the die exit area after cleaning can reduce the rate of buildup and extend the time between cleanings.

清除积料后在口模出料口使用脱模剂或者硅酮可以减轻积料程度并延长两次清除之间的时间。

10·Though mold CAE technology has already been used in injection mould and die casting mould design recently, there are still many problems.

近年来，模具CAE技术虽然已在注塑模、压铸模设计中得到应用，但仍存在不少问题。