全部

1·Those side surfaces are generated through the use of the cross feed, contrary to turning operations, where the usual longitudinal feed is used.

与一般采用纵向进给的车削作业相反，那些侧表面通过采用横向进给产生。

2·This article describes the vertical and cross feed mechanism for both metric and inch system. It is able to perfom automatic, rapid travelling and micro feed.

本文论述垂直和横向进给量的公制与英制共用机构，自动快速移动和自动微量进给机构。

3·During a facing operation, feed is provided by the cross slide, whereas the depth of cut is controlled by the carriage or compound rest.

在端面车削操作中，进给由横向滑板提供，而切削深度则通过大拖板或复式刀架控制。

4·The axial feed is provided by the carriage or the compound rest, either manually or automatically, whereas the depth of cut is controlled by the cross slide.

轴向进给通过大拖板或复式刀架手动或自动提供，然而切削深度则由横向滑板控制。

5·And in two places I need to cross a conduit with a 35 millimetres cold feed pipe.

但管外还要包隔热层而且电线管在两处要与35毫米的冷水管交叉，地方恰好不够。

6·Feed the belt strap in direction of arrow around the roll cage cross member into the adjustable slider.

将安全带按箭头方向绕着防滚翻保护架横梁穿入调节滑块。

7·Different users distribute different local feed junctors so as to solve resistance matching and cross talk in communication.

不同的用户分配不同绳路，解决阻抗匹配以及通信中的串音问题。

8·The various separation efficiencies were compared with changing inlet heights, feed speeds, and cross section shapes.

通过改变不同的入口高度、进液速度和入口管的截面形状，比较了不同的分离效果。

9·The key technologies such as the joint for cross-feed and cross pressurization were put forward.

阐明了交叉输送连接器和交叉增压等关键技术。

10·The APU usually takes its fuel supply from the LH engine-feed line, but when the cross-feed valve is open, the RH engine-feed line can also supply the APU with fuel.

APU通常从左发动机供油管路获得燃油，如果交输活门打开，右发动机供油管路也可以供应apu燃油。