全部

1·The present invention has low trigger voltage of SCR, can adjust freely in corresponding range and has hyperpyrexia breakdown current.

本发明的可控硅触发电压低，能在相应范围内自由调整且具有高热击穿电流。

2·The operation of the timer can be modified by modulating the internal threshold and trigger voltages, which is accomplished by applying an external voltage (or current) to CONT.

调整内部极限和扳机电压可以修正定时器的操作，扳机电压是通过将外部电压（或电流）应用于CONT来实现的。

3·The trigger wheel rotates with engine RPMs and causes the speed sensor, or pickup oil, to produce triggering voltage pulses that correspond to engine speed and piston position.

触发叶轮随发动机转速而旋转，使得转速传感器或拾波线圈产生与发动机转速和活塞位置相对应的触发电压脉冲。

4·A cosine phase shifter is applied in phase shifting circuit to meet the possible maximum trigger current and voltage of thruster.

移相线路中配有与弦移相器以满足可控硅整流器最大可能触发电流和电压。

5·The zero voltage trigger for thyristor can be realized with simple transistor circuit.

单向晶闸管的电压过零触发可利用简单的晶体管电路。

6·The shift trigger pulse of the thyristor trigger circuit with integration amplifier is generated by comparing directly principle of three-phase AC and shift-phase control voltage.

该晶闸管触发器采用集成运数放大器，移相触发脉冲的形成是根据三相交流电的各相与移相控制电压直接比较原理实现的。

7·U1B is a Schmitt trigger that compares the battery voltage to the same stable reference of the other section, but for another purpose: it controls the load switch Q3.

U 1 B的是一个施密特触发器，电池电压比较稳定的其他部分相同的参考，但另一个目的：它控制的负荷开关q3。

8·When the voltage applied to anode again becomes positive the gate will trigger the SCR on again.

当施加到阳极的电压再次变为正的栅极将再次触发可控硅上。

9·Compared with half peak voltage level trigger manner, the measurement accuracy is improved significantly and the application field of digital optical screen is expanded.

与传统的峰值一半电平触发方式相比，能够显著提高测试精度，从而扩大了光幕靶的使用范围。

10·The high voltage endurance test device for switch tube is composed of high voltage pulse generator, high voltage breakdown detector, trigger, auto-controller and DC/AC converter.

开关管冲击耐压装置由高压脉冲产生器、击穿检测器、触发器，及自动控制器、DC/AC 变换器等构成。