全部

1·Objective:To develop a system for sampling the spectacles frame on automatic lens edger.

目的：研制CCD采集眼镜框边缘尺寸系统。

2·Secondly, the mechanism of tracer and lens edger is described and the mechanical structures of them are designed.

给出了扫描机、磨边机游标头和夹片旋转机构的工作原理，并对其机械结构进行了设计；

3·For example, an air quality-conscious homeowner in Los Angeles installed outlets for his electric lawn mower, leaf blower and edger.

例如，空气质量，自觉在洛杉矶为他的房主安装电动割草机，叶风机，磨边机发售。

4·A series of flexible U sections, changed in its sections, was separately simulated and analyzed by edger roll forming and flat roll forming.

基于中厚板无切边轧制法中立轧轧边变形的物理模拟，分析了平辊立轧与倒棱轧制对中厚板断面形状的影响。

5·To find out, he placed lengths of fishing line through holes in a tin can. He attached the can to the spinning part of a motorized grass edger.

为了找到答案，他把一定长度的钓鱼线穿过锡罐的小孔，然后把这个锡罐固定到机动的草坪修边器的旋转部位。

6·When processed round edging, OG, flat edge, semi-round edge, then release first 4 motors, only used last 5 motors, used as five motors round edger.

磨圆边，鸭嘴边、平边、半圆边等成形轮时，可以将前面4个电机降下，作为5头圆边机使用。

7·Avoiding Internet traffic congestion: the direct route between the origin server and the Akamai edger servers may be congested because of Internet traffic.

避免Internet通信流拥挤：由于Internet通信流不稳定，起源服务器与Akamai边缘服务器之间的直接路由可能很拥挤。

8·In addition, the hardware of numerical control lens-edger is designed. The USB module is also developed and two methods for the design of USB communication program are introduced.

此外，设计了数控镜片磨边机的硬件电路，完成了磨边系统usb数据通信模块的设计，并给出两种USB通信程序的设计方法。

9·A phenomenon called tension SATURATION was observed in experiments, which took place between universal pass and edger when edging H-beam in continuous rolling process with tension.

根据实验结果，作者发现了在H型件轧边端孔型中的张力饱和现象。

10·T he relation of the four parameters with initial slab thickness, initial slab width, width reduction and edger roll diameter was obtained and a new mathematical model was accomplished as well.

得出表征立轧时轧件断面特征的四个参量与侧压量、立辊直径、板坯来料厚度及宽度间的关系，并建立了新的数学模型。