全部

1·The effects of inlet temperature and inlet velocity were taken into account.

实验考虑了进气速度、进气温度对贫油熄火油气比的影响。

2·And inlet velocity of mixture plays a significant role in catalytic reaction.

而且燃料混合物的入口流速对表面催化反应有很重要的影响。

3·The effect of inlet velocity of fluid on temperature distribution was analyzed.

分析了副槽入口风速等参数对转子温度分布的影响。

4·Thus, the nozzle structure has less influence than the inlet velocity on the overall gasifier gas flow field.

这说明喷嘴的结构对气化炉宏观气相流场的影响并不如入口速度对气相流场的影响显著。

5·The results show that: the pressure loss of muffler elements increased dramatically with the inlet velocity increased.

研究结果表明：消声单元的压力损失随入口流速的提高显著增大。

6·The result shows that the inlet velocity has significant influence on the temperature field and flow field in glass house.

结果表明：玻璃屋入口流速对室内及多孔墙内空气的温度场与流场有较大的影响。

7·Result Asymmetric inlet velocity profile deflexion could increase the area of low shear stress and the gradient of shear stress.

结论不对称入口速度剖面可能是诱发动脉粥样硬化发生的一个危险因子。

8·The results showed that at high inlet velocity, the diameter of regenerator channel had a significant effect on toluene conversion.

结果表明，在较高入口流速条件下，蓄热体孔道直径对甲苯转化率影响较大。

9·Result of analyzing experiment picturesindicates that particle radial inlet velocity component influences significantly the blade erosionmanner.

经对实验照片的分析可知，叶轮入口颗粒径向速度的大小是造成叶轮冲击磨损的主要原因。

10·There are many factors which affect the mixing of microfluidic, such as the inlet velocity, diffusion coefficient, depth-width ratio, and so on.

影响微流体混合的因素有很多，如入口速度、扩散系数、深宽比等。