全部

1·In this paper, epoxy resin adhesive modified by polysulfone is studied.

研究了聚砜改性环氧树脂胶粘剂。

2·The attachment ring (12) is secured to the pebble (10) by means of a swivel (16) bonded by epoxy resin adhesive in a bore formed in the pebble (10).

该连接环(12)利用旋转接头(16)固定于该卵石(10)，该旋转接头用环氧树脂粘结剂结合在形成于该卵石(10)的孔中。

3·This paper introduces the present situation of toughening modification of epoxy resin adhesive and recommends the typical toughening mechanisms and the applications of epoxy adhesive.

综述了近几年环氧树脂胶粘剂增韧改性研究的现状，介绍了各种增韧机理及应用。

4·The anticorrosive pressure bearing layer is made of engineering plastic, the antirust layer is made of stainless steel material, and the adhesive layer is made of epoxy resin adhesive.

其中防腐耐压层采用工程塑料，防锈层采用不锈钢材质，粘合层采用环氧树脂粘合剂。

5·Epoxy resin is an important thermoset. It is widely use in the fields of electron, machine, architecture and so on for its outstanding mechanical, adhesive and insulative properties.

环氧树脂是一种重要的热固性树脂，以其优异的力学、粘结和绝缘等性能被广泛应用于电子、机械、建筑、轻工等领域。

6·The influence of the kinds of epoxy resin, the proportion of composite curing agent , and the content of accelerant on the adhesive strength and heat resistant properties of adhesive were discussed.

重点讨论了环氧树脂种类、复配合固化剂比例以及促进剂用量对胶粘剂粘接强度和耐热性能的影响。

7·The high temperature resistant adhesive was prepared based on liquid polybutadiene epoxy resin(ELPB) cured by pyromellitic dianhydride(PMDA) and benzoyl peroxide(BPO).

采用均苯四甲酸酐（PMDA）和过氧化二苯甲酰（BPO）双固化剂固化聚丁二烯环氧树脂（ELPB），制备了ELPB/PMDA/BPO耐高温胶粘剂。

8·In this paper, two components solvent free adhesive which composition is polyurethane epoxy resin were introduced.

研制出一种无溶剂的双组份聚氨酯-环氧树脂胶粘剂。

9·The experiment compare of carbon cloths tension strength with and without glue indicates that the epoxy resin can not only make the fiber adhesive united but also increase the tensile strength.

对比有胶与无胶纤维布拉伸实验，表明环氧树脂不仅粘接纤维布，对纤维布有保护作用，而且能够显著提高其拉伸强度。

10·The influences of surface treatments, the pressures during bonding process and the thickness of adhesive layer on shearing strength were investigated with epoxy resin-DDS curing system as adhesive.

采用环氧树脂- DDS固化体系作为胶接剂，探讨了各种金属表面处理方法、胶接时对胶接面施加的压力、胶层厚度等因素对胶接剪切强度的影响。