全部

1·Use WTE early and often.

“尽早并且经常”使用WTE。

2·Add WTE to the WorkBench, as follows.

将WTE添加到“工作台”(WorkBench)，如下所示。

3·Make sure the WTE project is also checked.

确认也选中了 WTE 工程。

4·If you do not see the entry for WTE, it isn't installed.

如果您没看到WTE条目，那就是没安装WTE。

5·Start the WTE, as shown in Figure 5 above, for testing servlets.

启动WTE，如上面的图5所示，对servlet进行测试。

6·There are two main scenarios for using WTE to test you code artifacts.

这里有两种场景您要使用 WTE 来测试您的代码构件。

7·The two main components of WTE are the servlet engine and the name server.

WTE 的两个主要组件是 servlet 引擎和名称服务器。

8·The WTE is supposed to be used for testing smaller scale of applications.

WTE旨在用于测试小型应用程序。

9·Since you have updated the WTE server configuration, you must restart the WTE server.

由于您已经更新了WTE服务器配置，因此必须重新启动WTE Server。

10·Make sure that global security is enabled and configured correctly for this WTE server.

确保WTE服务器上的全局安全性已启用并正确配置。