全部

1·Be applicable to spray coating process.

适用于喷涂工序。

2·In the electric arc spray coating the oxide content was about 10%.

而且电弧喷涂涂层中具有约10%左右的氧化物含量。

3·The spray coating is a new technology for fiber mechanical construction.

耐火纤维喷涂是纤维机械化施工的一种新工艺。

4·After the spray coating the electrode is ready for use without further treatment.

在喷涂涂层后，电极无需进一步处理即可使用。

5·Meanwhile, the application of electrostatic spray coating on CVT and ct was narrated.

同时还介绍了静电喷塑涂层在CVT和CT上的应用情况。

6·The material selection and spray coating process in this repair method is introduced.

介绍了该修复方法的材料选定及喷涂工艺过程。

7·The lampstand uses the high quality cold rolled plate surface spray coating to become.

灯架采用优质冷轧板表面喷涂而成。

8·The application methods of spray coating, brush coating and erasing coating can be adopted.

使用方法可采用喷涂、刷涂、擦涂等。

9·Europeanization designed exterior with electrostatic spray coating, simple structure and elegant.

静电喷塑外壳，欧化设计，结构紧凑，美观大方。

10·In this paper described origin of spray coating of molybdenum, technological process and application.

叙述了钼喷涂的起源、生产工艺和应用概况。

喷涂

1·The spray coating equipment should have good electrostatic earthed device. Try to enlarge the air humidity of the work location as much as possible.

喷涂设备要有良好的静电接地装置，要尽可能增大工作场所内空气的湿度。

2·Among various composite techniques, 2 are commonly used: the point coating composite and spray coating composite techniques.

复合技术工艺很多，目前常用的有2种，即点涂复合和喷涂复合。

3·Spray coating of polytetrafluoroethylene (f 4) is adopted to improve the wear resistance of the stirrer's impeller, and so its service life is extended.

为提高搅拌器叶轮的耐磨性而采用了喷涂聚四氟乙烯(F - 4)新技术，大大提高了使用寿命。

4·This paper introduced the principle of the metal spray coating technique and its application of manufacturing RIM polyurethane foaming model with a satisfactory result.

介绍了金属喷涂技术的原理，并将这一技术用于制造rim聚氨酯发泡模具，取得了满意的效果。

5·The spray coating is a new technology for fiber mechanical construction.

耐火纤维喷涂是纤维机械化施工的一种新工艺。