全部

1·The shore hardness of materials is based on the rebound height of measuring punch pin, in practices the precision can not easily be ensured.

材料肖氏硬度是以测量冲头的回跳高度为依据，实际的测量精度不易保证。

2·Shore hardness A: 22 ISO868 (3 seconds) - Adhesion: primer in the absence of concrete, glass, metal, wood, stone, vinyl chloride on Bonding can also be ideal.

肖氏硬度A：22 ISO868（3秒）-粘着力： 在无底漆的混凝土、玻璃、金属、木材、石料、聚氯乙烯上亦可理想地粘接。

3·The bristles (6) have a high bristle density of at least 6 bristles per square millimeter and consist of a plastic material that has a Shore hardness D of more than 40.

所述刷毛（6）具有至少为6根刷毛（6） 每平方毫米的高刷毛密度，并包括具有肖氏硬度D大于40的塑性材料。

4·The compactness bending strength, compressive strength, shore-hardness of carbon slides impregnated with metals were increased; while open porosity and electrical resistivity decreased.

炭滑板经浸渍金属后，致密性、抗折强度、抗压强度、肖氏硬度明显提高，而开口气孔和电阻率降低。

5·The tensile strength and Shore A hardness decreased with EPDM amount increasing.

随着EPDM用量的增加，并用胶的拉伸强度及邵尔A硬度降低；

6·Shore A durometer use for testing the hardness of flexible materials such as rubber and plastics.

A 型邵氏橡胶硬度计适用于橡胶。塑料及类似硬度材料的硬度测定。

7·The experimental results show that, under vibration force field, tensile strength, tensile stress at 100% and elongation at break of TPE can be enhanced, and hardness(shore A) of TPE can be improved.

实验结果表明，振动力场的作用可以提高TPE的拉伸强度、100%定伸应力和扯断伸长，改善TPE的硬度。

8·The compactness bending strength, compressive strength, shore-hardness of carbon slides impregnated with metals were increased;

炭滑板经浸渍金属后，致密性、抗折强度、抗压强度、肖氏硬度明显提高，而开口气孔和电阻率降低。

9·Shore a is the most common method of evaluating rubber hardness in North America.

Shore A在北美地区是一种常用的评定橡胶硬度的方法。

10·The equipment is automated (and quite expensive,) but the results are repeatable and generally consistent with Shore a results within about five hardness points.

其设备是自动的(也相当昂贵)，其结果是可重现的，并在大约五个硬度点内和Shore A的结果有很好的一致性。