全部

1·But the tensile strength will be reduced a little, and the yield ratio increased.

但抗拉强度将随卷曲温度的降低而有少量损失，而屈强比提高。

2·In this paper, steel plate for buildings with high strength and low yield ratio was studied in laboratory.

本文对高强度低屈强比建筑用钢进行了实验室生产研究。

3·The method of the invention has the advantages of high yield ratio, large aspect ratio, uniform size and so on.

本发明的方法具有高产率、大长径比、尺寸均匀等优点。

4·The calculation showed that it raised the yield ratio of benzene from 94.2% to 98.2%. Since the modification of...

改进后的计算结果表明苯的收率从94.2%提高到98.2%，且整个改进过程不复杂。

5·The technological design makes use of symmetry and adopts the two mould process, which increases material yield ratio.

文章利用对称性，采用左右合模工艺，提高材料利用率。

6·The concepts of raw material utilization ratio, product yield ratio, product qualification ratio as well as the importance for the enterprise are discussed.

本文阐述了肉制品生产中原料利用率、产品出品率和产品合格率的概念及其在企业中的重要性。

7·Raising the testing strain rate, the strength and yield ratio increased the plasticity slightly decreased, but the strain rate hardening index kept constant.

应变率增加，材料强度提高，屈强比增大，塑性略有降低，但流变阶段应变率强化系数基本不变。

8·The specific surface area, pore size and yield ratio have been measured. Iodine and Methylene blue adsorption were used to study the adsorption capacity of ACHF.

测量了比表面积和得率，孔径分布，用碘吸附值、亚甲基兰吸附值测定了中空活性炭纤维的吸附性能，用SEM观察了其表面结构。

9·At lower annealing temperature obtain high strength and high yield ratio showed cyclic softening feature easily. That is detrimental to the using life of coiled tubing.

较低退火温度获得高强度、高屈强比易表现出循环软化特征，不利于提高连续油管的疲劳寿命。

10·The yield strength, yield ratio increase with the increase of annealing temperature, due to the impact of non-martensite and the decrease of movable dislocation density.

受非马氏体组织的影响及可动位错密度降低的作用，屈服强度、屈强比随退火温度升高而升高。